Form 10-K - 12/31/14

UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 10-K

(Mark One)
[X]    ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
                For the fiscal year ended
December 31, 2014 or

[   ]    TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
                For the transition period from __________________ to ___________________

Commission File Number 1-36117

inTEST Corporation
(Exact name of registrant as specified in its charter)

DELAWARE
(State or Other Jurisdiction of Incorporation or Organization)

22-2370659
(I.R.S. Employer Identification Number)


804 EAST GATE DRIVE, SUITE 200
MT. LAUREL, NEW JERSEY
(Address of Principal Executive Offices)

08054
(Zip Code)


Registrant's telephone number, including area code: (856) 505-8800


Securities registered pursuant to Section 12(b) of the Act:


               Title of Each Class               
Common Stock, par value $0.01 per share


Name of Each Exchange on Which Registered
NYSE MKT

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes /  / No /X/
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes /  / No /X/

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes /X/ No /  /

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes /X/ No /  /

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. /X/

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.
Large accelerated filer /  /                                                                                            Accelerated filer /  /
Non-accelerated filer (Do not check if a smaller reporting company)/  /                    Smaller reporting company /X/


Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes /  / No /X/

The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold on June 30, 2014 (the last business day of the registrant's most recently completed second fiscal quarter), was: $31,037,908.

The number of shares outstanding of the registrant's Common Stock, as of March 20, 2015, was 10,562,678.

                                                                          DOCUMENTS INCORPORATED BY REFERENCE

Portions of the definitive proxy statement of the Registrant for the Registrant's 2015 Annual Meeting of Stockholders, to be filed with the Securities and Exchange Commission within 120 days after the end of the fiscal year covered by this Report, are incorporated by reference into Part III of this Report.

 

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014

INDEX

 

 

PART I

Page

Item 1.

Business

3

Item 1A.

Risk Factors

13

Item 1B.

Unresolved Staff Comments

19

Item 2.

Properties

19

Item 3.

Legal Proceedings

19

Item 4.

Mine Safety Disclosures

19

PART II

Item 5.

Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

19

Item 6.

Selected Financial Data

20

Item 7.

Management's Discussion and Analysis of Financial Condition and Results of Operations

21

Item 7A.

Quantitative and Qualitative Disclosures About Market Risk

27

Item 8.

Financial Statements and Supplementary Data

27

Item 9.

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

28

Item 9A.

Controls and Procedures

28

Item 9B.

Other Information

29

PART III

Item 10.

Directors, Executive Officers and Corporate Governance

29

Item 11.

Executive Compensation

29

Item 12.

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

29

Item 13.

Certain Relationships and Related Transactions, and Director Independence

30

Item 14.

Principal Accounting Fees and Services

30

PART IV

Item 15.

Exhibits, Financial Statement Schedules

30

Signatures

31

Index to Exhibits

32

Index to Consolidated Financial Statements and Financial Statement Schedule

34

 

 

- 2 -

 

 

 

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014

PART I

Item 1.    BUSINESS

Cautionary Statement Regarding Forward-Looking Statements

From time to time, we make written or oral "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995, including statements contained in our filings with the Securities and Exchange Commission, or SEC, (including this Report on Form 10-K), our annual report to stockholders and in other communications. These statements do not convey historical information, but relate to predicted or potential future events, such as statements of our plans, strategies and intentions, or our future performance or goals. Our forward-looking statements can often be identified by the use of forward-looking terminology such as "believes," "expects," "intends," "may," "will," "should" or "anticipates" or similar terminology, and include, but are not limited to, statements made in this Report regarding:

Investors and prospective investors are cautioned that such forward-looking statements are only projections based on current estimations. These statements involve risks and uncertainties and are based upon various assumptions. We discuss many of these risks and uncertainties under Item 1A "Risk Factors," below, and elsewhere in this Report. These risks and uncertainties, among others, could cause our actual future results to differ materially from those described in our forward-looking statements or from our prior results. We are not obligated to update these forward-looking statements, even though our situation may change in the future.

INTRODUCTION

We are an independent designer, manufacturer and marketer of thermal, mechanical and electrical products that are used by semiconductor manufacturers in conjunction with ATE, in the testing of ICs. In addition, in recent years we have marketed our thermal products in markets outside the ATE market, such as the automotive, consumer electronics, defense/aerospace, energy, industrial and telecommunications markets. Our high performance products are designed to enable our customers to improve the efficiency of their test processes and, consequently, their profitability.

- 3 -

 

 

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014

Item 1.    BUSINESS (Continued)

We sell our products worldwide. Within the ATE market, we sell our products both directly to major semiconductor manufacturers and semiconductor test subcontractors and indirectly through leading ATE manufacturers. In markets outside the ATE market, we sell our products directly to the end user of the product. Our largest customers include Advanced Semiconductor Engineering, Inc., Analog Devices, Inc., Avago Technologies Limited, Emerson Electric Co., Hakuto Co. Ltd., Linear Technology Corp., NXP Semiconductors N.V., PDF Solutions, Inc., Teradyne, Inc. and Texas Instruments Incorporated.

The consolidated entity is comprised of inTEST Corporation (parent) and our wholly-owned subsidiaries. inTEST Corporation was incorporated in New Jersey in 1981 and reincorporated in Delaware in April 1997. We manage our business as three product segments, as more fully discussed under "Our Segments" below, which consist of our Thermal Products, Mechanical Products and Electrical Products segments.

MARKETS

Overview

Our business has historically focused exclusively on the ATE market, which provides automated test equipment to the semiconductor market; however, since 2009, we have begun to diversify our served markets to address the thermal test requirements of several other markets outside the ATE market. These include the automotive, consumer electronics, defense/aerospace, energy, industrial and telecommunications markets. In the last five years, our net revenues from sales in markets outside the ATE market have ranged from 17% to 30%. As we are a relatively new market entrant in these markets outside the ATE market, our sales into these markets have varied significantly from period to period and we expect they will continue to do so in future periods. One of our goals is to further expand our sales in these markets outside the ATE market. During both 2014 and 2013, our net revenues in markets outside the ATE market were $11.1 million and represented 27% and 28%, respectively, of our total net revenues.

The level of our net revenues in the various markets we serve outside the ATE market varies significantly from market to market. During 2014 and 2013, our net revenues into the telecommunications market represented 11% and 10%, respectively, of our total net revenues, while our net revenues into the defense/aerospace market represented 8% and 7%, respectively, of our total net revenues and our net revenues into the industrial market represented 4% and 9%, respectively, of our total net revenues. The level of our net revenues in these non-ATE markets has varied significantly in the past and we expect will vary significantly in the future as we build our presence in these markets and establish new markets for our products. Because we are a recent market entrant in these markets, we have not yet developed meaningful market shares in these non-ATE markets. Consequently, we are continuing to evaluate buying patterns and opportunities for growth in these markets that may affect our performance. The following discussion of our markets, therefore, is limited to only the ATE and semiconductor markets, which currently represent the majority of our net revenues.

Semiconductor and ATE Markets

Historically, the semiconductor market has been characterized by rapid technological change, wide fluctuations in demand and shortening product life cycles. Designers and manufacturers of a variety of electronic and industrial products, such as cell phones, telecom and datacom systems, Internet access devices, computers, transportation and consumer electronics, require increasingly complex ICs to provide improved end-product performance demanded by their customers. Semiconductor manufacturers generally compete based on product performance and price. We believe that testing costs represent a significant portion of the total cost of manufacturing ICs. Semiconductor manufacturers remain under pressure to maximize production yields and reduce testing costs. At the same time, the growing complexity of ICs has increased the difficulty of maximizing test yields. In order to address these market trends, semiconductor manufacturers strive for more effective utilization of ATE, smaller test areas and increased wafer level testing.

Demand for new ATE and related equipment depends upon several factors, including the demand for products that incorporate ICs, the increasing complexity of ICs and the emergence of new IC design, production and packaging technologies. Some of the evolutionary changes in IC technologies included the shift to 300 mm wafers in production, system-on-a-chip, or SOC, where digital, analog and memory functions are combined on a single IC, and chip scale packaging. As a result of these and other advances, semiconductor manufacturers may require additional ATE not only to handle increases in production but also to handle the more sophisticated testing requirements of ICs.

- 4 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 1.    BUSINESS (Continued)

IC Test Process

Semiconductor manufacturers typically produce ICs in multiples of several hundred on a silicon wafer which is later separated or "diced" into individual ICs. Extended leads are then attached to the individual ICs, for later connection to other electrical components. In most cases, the ICs are then encapsulated in a plastic, ceramic or other protective housing. These process steps are called "packaging."

Wafers are tested before being diced and packaged, to ensure that only properly functioning ICs are packaged. This testing step has several names, including "front-end test," "wafer test," "wafer probe" or "wafer sort." In front-end test, an electronic handling device known as a wafer prober automatically positions the wafer under a probe card which is electronically connected to a "test head," which connects electrically to a test system. During front-end testing there is a growing trend of thermally conditioning the wafer during test, especially in the memory and automotive markets. Once the good ICs have been identified, they are packaged.

The packaged ICs also require testing, called "back-end test" or "final test," to determine if they meet design and performance specifications. Packaged ICs are tested after loading into another type of electronic handling device called a "package handler" or "handler," which then transfers the packaged ICs into a test socket which is attached to the test head. These handlers may be temperature controlled for testing. "Wafer probers" and "handlers" are sometimes referred to in this Report collectively as "electronic device handlers."

Testers range in price from approximately $100,000 to over $2.0 million each, depending primarily on the complexity of the IC to be tested and the number of test heads (typically one or two) with which each tester is configured. Probers and handlers range in price from approximately $50,000 to $500,000. A typical test floor of a large semiconductor manufacturer may have 100 test heads and 100 probers or 250 handlers supplied by various vendors for use at any one time.

Test head manipulators, also referred to as positioners, facilitate the movement of the test head to the electronic device handler. Docking hardware mechanically connects the test head to the wafer prober or handler. Tester interface products provide the electrical connection between the test head and the wafer or packaged IC. Traditionally, temperature management products are used in back-end test to allow a manufacturer to test packaged ICs under the extreme temperature conditions in which the IC may be required to operate. However, we believe that temperature-controlled testing will be an increasingly important part of front-end wafer testing as more parameters traditionally tested in back end-test are moved to front-end test.

Trends in IC Testing

ATE is used to identify unacceptable packaged ICs and bad die on wafers. ATE assists IC manufacturers in controlling test costs by performing IC testing in an efficient and cost-effective manner. In order to provide testing equipment that can help IC manufacturers meet these goals, we believe the ATE market must address the following issues:

Change in Technology. End-user applications are demanding ICs with increasingly higher performance, greater speeds, and smaller sizes. ICs that meet these higher standards, including SOC designs, are more complex and dense. These technology trends have significant implications for the IC testing process, including:

Need for Plug-Compatibility and Integration. Semiconductor manufacturers need test methodologies that will perform increasingly complex tests while lowering the overall cost of testing. This can require combining ATE manufactured by various companies into optimally performing systems. Semiconductor manufacturers have to work closely with various test hardware, software, interface and component vendors to resolve design and compatibility issues in order to make these vendors' products plug-compatible with test equipment manufactured by other vendors.

- 5 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014

Item 1.    BUSINESS (Continued)

Testing Under Extreme Conditions. ICs will have to perform across a wider spectrum of temperature and environmental conditions than ever before because of the growing complexity of products in which they are deployed. In recent years, temperature testing has found an increasing role in front-end, wafer level testing. Creating a uniform thermal profile over much larger wafer areas represents a significant engineering and design challenge for ATE manufacturers.

Demand for Higher Levels of Technical Support. As IC testing becomes more complex, semiconductor manufacturers demand higher levels of technical support on a routine basis. ATE manufacturers must commit appropriate resources to technical support in order to develop close working relationships with their customers. This level of support also requires close proximity of service and support personnel to customers' facilities.

Cost Reduction Through Increased Front-End Testing. As the cost of testing ICs increases, semiconductor manufacturers will continue to look for ways to streamline the testing process to make it more cost-effective, such as the trend to use massive parallel test, in which semiconductor manufacturers test multiple ICs on the wafer simultaneously. We believe that this factor will lead to more front-end, wafer-level testing.

OUR SOLUTIONS

Historically, we have focused our development efforts on designing and producing high quality products that provide superior performance and cost-effectiveness. We have sought to address each manufacturer's individual needs through innovative and customized designs, use of the best materials available, quality manufacturing practices and personalized service. We have designed solutions to overcome the evolving challenges facing the ATE and other markets that we serve, which we believe provide the following advantages:

Temperature-Controlled Testing. Our Thermostream (R) products are used by manufacturers in a number of markets to stress test a variety of semiconductor and electronic components, PC boards and sub-assemblies. Our Thermochuck (R) products are used by semiconductor manufacturers for front-end temperature stress screening at the wafer level. Factors motivating manufacturers to use temperature testing include design characterization, failure analysis and quality control as well as determining performance under extreme operating temperatures, all of which contribute to manufacturing cost savings. Our acquisitions of Sigma Systems Corporation ("Sigma"), in October 2008, and Thermonics, Inc. ("Thermonics"), in January 2012, have significantly increased our product offerings in the area of temperature-controlled testing. Sigma's thermal platforms and temperature chambers can accommodate large thermal masses and are found in both laboratory and production environments. Thermonics products provide a range of precision temperature forcing systems used throughout various markets to verify the performance of products at a range of temperatures.

Scalable, Universal, High Performance Interface Technology. Our universal test head manipulators provide a high degree of positioning flexibility with a minimum amount of effort. As a result, our products can be used in virtually any test setting. Our manipulator products are designed to accommodate the increased size of test heads. Our docking hardware offers precise control over the connection to test sockets, probing assemblies and interface boards, reducing downtime and minimizing costly damage to fragile components. Our tester interface products optimize the integrity of the signals transmitted between the test head and the device under test by being virtually transparent to the test signals. This results in increased accuracy of the test data and may thus enable improved test yields. We believe that these characteristics will gain even more significance as testing becomes even more demanding.

Compatibility and Integration. A hallmark of our products has been, and continues to be, compatibility with a wide variety of ATE. Our mechanical products are all designed to be used with otherwise incompatible ATE. We believe this integrated approach to ATE facilitates smooth changeover from one tester to another, longer lives for interface components, better test results, increased ATE utilization and lower overall test costs.

Worldwide Customer Service and Support. We have long recognized the need to maintain a physical presence near our customers' facilities. As of December 31, 2014, we had domestic manufacturing facilities in New Jersey, Massachusetts and California and provided service to our customers from sales and service personnel based in the U.S., Europe and Asia. Our engineers are easily accessible to, and can work directly with, most of our customers from the time we begin developing our initial proposal, through the delivery, installation and use of the product by our customer. In this way, we are able to develop and maintain close relationships with our customers.

- 6 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014

Item 1.    BUSINESS (Continued)

OUR STRATEGIES

We remain committed to our goals of being recognized in our markets as the designer and manufacturer of the highest quality and most cost effective products and becoming the key supplier of all of our customers' product testing needs, other than probers, handlers and testers. Our strategies to achieve these goals include the following:

Pursuing Synergistic Acquisitions. A key element of our growth strategy has been to acquire businesses, technologies or products that are complementary to our current product offerings. Since our initial public offering in 1997, we have acquired several businesses which have enabled us to expand our line of product offerings and have given us the opportunity to market a broader range of products to our customer base. In particular, the acquisitions of Temptronic in 2000, Sigma in 2008, and Thermonics in 2012, provided access to markets that are less sensitive to cyclicality than the ATE market. We seek to make acquisitions that will further expand our product lines as well as increase our exposure to markets outside of the ATE market.

Pursuing Revenue Growth Opportunities Outside the Semiconductor ATE Market. Another element of our growth strategy is to pursue revenue growth opportunities in markets we have not traditionally served, such as the automotive, consumer electronics, defense/aerospace, energy, industrial and telecommunications markets. We believe that we may be able to reduce some of the cyclicality that we have historically experienced by further diversifying our revenue streams outside the semiconductor ATE market. We see the most potential for this within our Thermal Products segment. During both 2014 and 2013, approximately $11.1 million, or 27% and 28%, respectively, of our total net revenues were derived from markets outside semiconductor test. These revenues were all generated by our Thermal Products segment. We cannot determine at this time whether we will be successful in building our sales in these non-traditional markets or what the growth rate of our sales in these markets will be in future periods.

Providing Technologically Advanced Solutions. We are committed to designing and producing only the highest quality products which incorporate innovative designs to achieve optimal cost-effectiveness and functionality for each customer's particular situation. Our engineering and design staff is continually engaged in developing new and improved products and manufacturing processes.

Leveraging Our Strong Customer Relationships. Our technical personnel work closely with ATE manufacturers to design tester interface and docking hardware that are compatible with their ATE. As a result, we are often privy to proprietary technical data and information about these manufacturers' products. We believe that because we do not compete with ATE manufacturers in the prober, handler and tester markets, we have been able to establish strong collaborative relationships with these manufacturers that enable us to develop ancillary ATE products on an accelerated basis.

Maintaining Our International Presence. Our existing and potential customers are concentrated in certain regions throughout the world. We believe that we must maintain a presence in the markets in which our customers operate. We currently have offices in the U.S., Germany and Singapore.

Controlling Costs. At the same time as we are pursuing growth opportunities, we will seek ways to more aggressively streamline our cost structure, so that we are positioned to offer products at prices that provide the margin for a reasonable profit as well as the resources for continual product development.

OUR SEGMENTS

Our business is managed as three segments, which are also our reporting units: Thermal Products, Mechanical Products and Electrical Products. Our Thermal Products segment consists of our subsidiaries in Mansfield, Massachusetts (Temptronic Corporation, which manufactures products under the Temptronic, Sigma and Thermonics brand names), Germany (inTEST Thermal Solutions GmbH), and Singapore (inTEST Pte Ltd.). Our Mechanical Products segment consists of our manufacturing operation in Mt. Laurel, New Jersey. Our Electrical Products segment consists of our subsidiary in Fremont, California (inTEST Silicon Valley Corporation).

Semiconductor manufacturers use our mechanical products during testing of wafers and specialized packaged ICs. They use our thermal and electrical products in both front-end and back-end testing of ICs. These ICs include microprocessors, digital signal processing chips, mixed signal devices, MEMS (Micro-Electro-Mechanical Systems), application specific ICs and specialized memory ICs, and are used primarily in the automotive, consumer electronics, defense/aerospace, energy, industrial and telecommunications markets. We custom design most of our products for each customer's particular combination of ATE.

- 7 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 1.    BUSINESS (Continued)

Thermal Products

Our thermal products are sold into the environmental test market encompassing a wide variety of markets including the ATE, automotive, consumer electronics, defense/aerospace, energy, industrial and telecommunications markets. Our thermal products enable a manufacturer to test semiconductor wafers and ICs, electronic components and assemblies, mechanical assemblies and electromechanical assemblies. These products provide the ability to characterize and stress test a variety of materials over extreme and variable temperature conditions that can occur in actual use.

ThermoStream(R) Products
: Our ThermoStream(R) products are used in the semiconductor market as a stand-alone temperature management tool, or in a variety of electronic test applications as part of our MobileTemp systems. ThermoStream(R) products provide a source of heated and cooled air which can be directed over the component or device under test. These systems are capable of controlling temperatures to within +/- 0.1 degree Celsius over a range of -100 degrees Celsius to as high as +300 degrees Celsius within 1.0 degree Celsius of accuracy. As a stand-alone tool, ThermoStreams(R) provide a temperature-controlled air stream to rapidly change and stabilize the temperature of packaged ICs and other devices.

Our MobileTemp Series combines our ThermoStream(R) products with our family of exclusive, high-speed ThermoChambers to offer thermal test systems with fast, uniform temperature control in a compact package enabling temperature testing at the test location. MobileTemp Systems are designed specifically for small thermal-mass applications beyond the semiconductor market and have found application in the automotive, electronic, fiber optic and oil field service markets testing such things as electronic sub-assemblies, sensor assemblies, and printed circuit boards.

Traditionally, our customers used ThermoStream(R) products primarily in engineering, quality assurance and small-run manufacturing environments. However, increasingly, our customers use ThermoStream(R) products in longer-run production applications. Sigma has significantly broadened our product line by providing the ability to thermally test devices and assemblies requiring a far larger scale, both physically and thermally, than previously achievable. ThermoStream(R) and MobileTemp products range in price from approximately $15,000 to $50,000.

ThermoChambers: Our chamber products are available in a variety of sizes, from small bench-top units to chambers with internal volumes of twenty-seven cubic feet and greater and with temperature ranges as wide as from -190 degrees Celsius to +500 degrees Celsius. Chambers can be designed to utilize liquid nitrogen or liquid carbon dioxide cooling or mechanical refrigeration, and sometimes both. These chambers can accommodate large thermal masses and are found in both laboratory and production environments. Chambers are priced from $15,000 to $150,000.

Thermal Platforms: Our platforms are available in surface sizes ranging from 7.2 square inches to 616 square inches. They provide a flat, thermally conductive, precisely temperature controllable surface that is ideal for conditioning of testing devices with a flat surface. Platforms are available with temperature ranges as broad as -100 degrees Celsius to +250 degrees Celsius. Thermal platforms can be designed to utilize either liquid nitrogen or liquid carbon dioxide cooling or mechanical refrigeration. Platforms offer virtually unimpeded access to the device under test and their easy access and compact size makes them ideal for convenient bench-top use. Platforms are priced from $6,500 to $65,000.

ThermoChuck(R) Products: Our ThermoChuck(R) precision vacuum platform assemblies, used primarily in the semiconductor market, quickly change and stabilize the temperature of semiconductor wafers accurately and uniformly during testing without removing the wafer from its testing environment. Such temperatures can range from as low as -65 degrees Celsius to as high as +300 degrees Celsius. ThermoChucks(R) are incorporated into wafer prober equipment for laboratory analysis and for in-line production testing of semiconductor wafers. ThermoChuck(R) products range in price from approximately $16,000 to $120,000.

Thermonics(R) Products: Our Thermonics temperature conditioning products provide tempered gas or fluid to enable customers to maintain desired thermal conditions within their tool or process. Applications include general industrial, chemical processing, energy, electronics and semiconductor industries. Prices range from $20,000 to greater than $100,000.


- 8 -

 

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 1.    BUSINESS (Continued)

Mechanical Products

Manipulator Products. We offer three lines of manipulator products: the in2(R), the Aero Series and the Cobal Series. These free-standing universal manipulators can hold a variety of test heads and enable an operator to reposition a test head for alternate use with any one of several probers or handlers on a test floor. Certain members of the Aero family are also available as a lower-cost solution for dedicated prober-only or handler-only test cell applications.

The in2(R) and Cobal Series of manipulator products incorporate our balanced floating-head design. This design permits a test head weighing up to 1,600 pounds to be held in an effectively weightless state, so it can be moved manually or with optional powered assistance, up or down, right or left, forward or backward and rotated around each axis (known as six degrees of motion freedom) by an operator using a modest amount of force. The same design features enable the operator to dock the test head without causing inadvertent damage to the fragile electrical contacts. As a result, after testing a particular production lot of ICs, the operator can quickly and easily disconnect a test head that is held in an in2(R) manipulator and equipped with our docking hardware and dock it to another electronic device handler for testing either a subsequent lot of the same packaged ICs or to test different ICs. The in2(R) and Cobal Series manipulators range in price from approximately $12,000 to $60,000.

The Aero Series of manipulator products consists of the Aero 450H and Aero 150P manipulators. These manipulators are designed to handle test heads weighing less than 1,500 pounds. The up and down movement is supported by an air-pressure-based floating state technology. The Aero Series manipulators range in price from $10,000 to $30,000.

Docking Hardware Products. Our docking hardware products protect the delicate interface contacts and ensure proper repeatable and precise alignment between the test head's interface board and the prober's probing assembly or the handler's test socket as they are brought together, or "docked." A simple cam action docks and locks the test head to the prober or handler, thus eliminating motion of the test head relative to the prober or handler. This minimizes deterioration of the interface boards, test sockets and probing assemblies which is caused by constant vibration during testing. Our docking hardware products are used primarily with floating-head universal manipulators when maximum mobility and inter-changeability of handlers and probers between test heads is required. By using our docking hardware products, semiconductor manufacturers can achieve cost savings through improved ATE utilization, improved accuracy and integrity of test results, and reduced repairs and replacements of expensive ATE interface products.

We believe our docking hardware products offer our customers the ability to make various competing brands of test heads compatible with various brands of probers and handlers by only changing interface boards. This is called "plug-compatibility." Plug-compatibility enables increased flexibility and utilization of test heads, probers and handlers purchased from various manufacturers. We believe that because we do not compete with ATE manufacturers in the sale of probers, handlers or testers, ATE manufacturers are willing to provide us with the information that is integral to the design of plug-compatible products. Our docking hardware products range in price from approximately $2,000 to $25,000.

Electrical Products

Our electrical products, which include various types of tester interfaces, provide the electrical connections between the tester and the wafer prober or IC handler to carry the electrical signals between the tester and the probe card on the prober or the test socket on the handler. Our designs optimize the integrity of the transmitted signal. Therefore, our tester interfaces can be used with high speed, high frequency, digital or mixed signal testers used in testing more complex ICs. Because our tester interface products enable the tester to provide more reliable yield data, our interfaces may also reduce IC production costs. We design standard and modular interface products to address most possible tester/prober combinations on the market today. In addition, we provide a custom design service that will allow any of our customers to use virtually any tester, prober or handler combination with any type of device, such as analog, digital, mixed signal and radio frequency. For example, our Centaur(R) modular interface is designed to provide flexibility and scalability through the use of replaceable signal modules which can be easily changed on the test floor as our customers' testing requirements change. In addition to the Centaur(R) modular interface, we also offer over 200 different types of tester interface models that we custom designed for our customers' specific applications. These products range in price from approximately $7,000 to $40,000.

- 9 -

 

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014

Item 1.    BUSINESS (Continued)

Financial Information About Product Segments and Geographic Areas

Please see Note 14 of our consolidated financial statements included in Item 8 of this Report on Form 10-K for additional data regarding net revenues, profit or loss and total assets of each of our segments and revenues attributable to foreign countries.

MARKETING, SALES AND CUSTOMER SUPPORT

We market and sell our products primarily in markets where semiconductors are manufactured. North American and European semiconductor manufacturers have located most of their back-end factories in Southeast Asia. The front-end wafer fabrication plants of U.S. semiconductor manufacturers are primarily in the U.S. Likewise, European, Taiwanese, South Korean and Japanese semiconductor manufacturers generally have located their wafer fabrication plants in their respective countries.

Thermal Products
: We market our thermal products brands, Temptronic, Sigma and Thermonics, under the umbrella name of inTEST Thermal Solutions and sales to ATE manufacturers are handled directly by our own sales force. Sales to semiconductor manufacturers and customers in other markets in the U.S. are handled through independent sales representative organizations. In Singapore and Malaysia, our sales and service are handled through our internal sales and service staff. In the rest of Asia, our sales are handled through distributors. In Europe, sales managers at our office in Germany, as well as regional distributors and independent sales representatives, sell to semiconductor manufacturers and customers in other markets. We visit our distributors regularly and have trained them to sell and service all of our thermal products.

Mechanical and Electrical Products: In North America, we sell to semiconductor manufacturers principally through the use of independent, commissioned sales representatives. North American sales representatives also coordinate product installation and support with our technical staff and participate in trade shows.

Our internal sales staff handles sales to ATE manufacturers and is responsible for a portfolio of customer accounts and for managing certain independent sales representatives. In addition, our account managers are responsible for pricing, quotations, proposals and transaction negotiations, and they assist with applications engineering and custom product design. Technical support is provided to North American customers and independent sales representatives by employees based in New Jersey, California and Texas.

In Europe we sell to semiconductor and ATE manufacturers through our internal sales staff and through the use of independent sales representatives. Technical support is provided to European customers by an employee based in the UK or by independent sales representatives who we have trained. In China, Malaysia, the Philippines, Singapore, South Korea, Taiwan and Thailand, we sell through the use of independent sales representatives who are supervised by our internal sales staff. International sales representatives are responsible for sales, installation, support and trade show participation in their geographic market areas. Technical support is provided to Asian customers primarily by employees based in Malaysia, the Philippines and Taiwan.

CUSTOMERS

We market all of our products to end users, which include semiconductor manufacturers and third-party foundries, test and assembly houses, as well as to original equipment manufacturers ("OEMs"), which include ATE manufacturers and their third-party outsource manufacturing partners. In the case of thermal products, we also market our products to independent testers of semiconductors, manufacturers of automotive, consumer electronics, defense/aerospace, energy, industrial and telecommunications products, and semiconductor research facilities. Our customers use our products principally in production testing, although our ThermoStream(R) products traditionally have been used largely in engineering development and quality assurance. We believe that we sell to most of the major semiconductor manufacturers in the world.

Texas Instruments Incorporated accounted for 13% of our consolidated net revenues in both 2014 and 2013. While all three of our operating segments sold to this customer, these revenues were primarily generated by our Mechanical Products and Electrical Products segments. Hakuto Co. Ltd. accounted for 11% of our consolidated net revenues in 2014. These revenues were generated by our Thermal Products segment. Our ten largest customers accounted for approximately 48% and 47% of our consolidated net revenues in 2014 and 2013, respectively. The loss of any one or more of our largest customers, or a reduction in orders by a major customer, could materially reduce our net revenues or otherwise materially affect our business, financial condition, or results of operations.

- 10 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014

Item 1.    BUSINESS (Continued)

Our largest customers in 2014 include:

Semiconductor Manufacturers

ATE Manufacturers

Other

Advanced Semiconductor Engineering, Inc.

Teradyne, Inc.

Avago Technologies

Analog Devices, Inc.

 

Emerson Electric Co.

Linear Technology Corporation

 

Hakuto Co. Ltd.

NXP Semiconductors

 

 

PDF Solutions, Inc.

 

 

Texas Instruments Incorporated

 

 


MANUFACTURING AND SUPPLY

As of December 31, 2014, our principal manufacturing operations consisted of assembly and testing at our facilities in Massachusetts, New Jersey and California. We assemble most of our products from a combination of standard components and custom parts that have been fabricated to our specifications by either third-party manufacturers or our own fabrication operation in New Jersey. Our practice is to use the highest quality raw materials and components in our products. The primary raw materials used in fabricated parts are all widely available. We purchase substantially all of our components from multiple suppliers. We purchase certain raw materials and components from single suppliers, however we believe that all materials and components are available in adequate amounts from other sources, although from time to time, certain components may be in short supply because of high demand or the inability of some vendors to consistently meet our quality or delivery requirements.

We conduct inspections of incoming raw materials, fabricated parts and components using sophisticated measurement equipment. This includes testing with coordinate measuring machines in all but one of our manufacturing facilities to ensure that products with critical dimensions meet our specifications. We have designed our inspection standards to comply with applicable MIL specifications and ANSI standards.

In 2001, we obtained ISO 9001:1994 certification at our New Jersey facility. During 2003, we made the determination to upgrade to ISO 9001:2000 at our New Jersey facility, which was completed in 2007. In May 2003, our California facility obtained ISO 9001:2000 certification. In 2009, we made the decision to discontinue ISO certification in our New Jersey and California operations because our customers at that time operated solely in the semiconductor market where ISO certification has little impact. We continue to employ all the practices embodied in the ISO 9001:2000 standard. We believe that the loss of ISO 9001 certification for our New Jersey and California facilities has not negatively impacted our working relationships with our customers or prevented us from obtaining orders from our customers. Our Massachusetts facility completed ISO 9001:2000 certification in November 2004 and upgraded to ISO 9001:2008 in November 2009 and has maintained certification with the ISO 9001:2008 standard since that time.

ENGINEERING AND PRODUCT DEVELOPMENT

Our success depends on our ability to provide our customers with products and solutions that are well engineered, and to design those products and solutions before, or at least no later than, our competitors. As of December 31, 2014, we employed a total of 27 engineers, who were engaged full time in engineering and product development. In addition, when the demands of engineering and product development projects exceed the capacity or knowledge of our in-house staff, we retain temporary third-party engineering and product development consultants to assist us. Our practice in many cases is to assign engineers to work with specific customers, thereby enabling us to develop the relationships and exchange of information that is most conducive to successful product development and enhancement. In addition, some of our engineers are assigned to new product research and development and have worked on such projects as the development of new types of universal manipulators, the redesign and development of new thermal products and the development of high performance interfaces.

Since most of our products are customized, we consider substantially all of our engineering activities to be engineering and product development. We spent approximately $3.6 million in 2014 and $3.7 million in 2013 on engineering and product development, respectively.

- 11 -


inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 1.    BUSINESS (Continued)

PATENTS AND OTHER PROPRIETARY RIGHTS

Our policy is to protect our technology by filing patent applications for the technologies that we consider important to our business. We also rely on trademarks, trade secrets, copyrights and unpatentable know-how to protect our proprietary rights. It is our practice to require that all of our employees and third-party product development consultants assign to us all rights to inventions or other discoveries relating to our business that were made while working for us. In addition, all employees and third-party product development consultants agree not to disclose any private or confidential information relating to our technology, trade secrets or intellectual property.

As of December 31, 2014, we held 47 active U.S. patents and had 11 pending U.S. patent applications covering various aspects of our technology. Our U.S. patents expire at various times beginning in 2015 and extending through 2033. During 2014, three U.S. patents were issued and we had three U.S. patents expire. We do not believe that the expiration of these patents or the upcoming expiration of certain of our patents in 2015 will have a material impact on our business. We also hold foreign patents and file foreign patent applications, in selected cases corresponding to our U.S. patents and patent applications, to the extent management deems appropriate.

While we believe that our patents and other proprietary rights are important to our business, we also believe that, due to the rapid pace of technological change in the semiconductor equipment market, the successful manufacture and sale of our products also depends upon our engineering, manufacturing, marketing and servicing skills. In the absence of patent protection, we would be vulnerable to competitors who attempt to copy or imitate our products or processes. We believe our intellectual property has value, and we have taken in the past, and will take in the future, actions we deem appropriate to protect such property from misappropriation. There can be no assurance, however, that such actions will provide meaningful protection from competition. For additional information regarding risks related to our intellectual property, see "Risk Factors."

COMPETITION

We operate in an increasingly competitive environment within each of our product segments. Some of our competitors have greater financial resources and more extensive design and production capabilities than we do. Certain markets in which we operate have become more fragmented, with smaller companies entering the market. These new smaller entrants typically have much lower levels of fixed operating overhead than we do, which enables them to be profitable with lower priced products. In order to remain competitive with these and other companies, we must be able to continue to commit a significant portion of our personnel, financial resources, research and development and customer support to developing new products and maintaining customer relationships worldwide.

Our competitors include independent manufacturers, ATE manufacturers and, to a lesser extent, semiconductor manufacturers' in-house ATE interface groups. Competitive factors in our market include price, functionality, timely product delivery, customer service, applications support, product performance and reliability. We believe that our long-term relationships with the industry's leading semiconductor manufacturers and other customers, and our commitment to, and reputation for, providing high quality products, are important elements in our ability to compete effectively in all of our markets.

Our principal competitor for Thermostream products is FTS Systems. Our principal competitors for Thermochuck products include ERS Electronik GmbH, Cascade Microtech, Inc. and Espec Corp. Our principal competitors for environmental chambers are Thermotron Industries, Cincinnati Sub-Zero Products, Inc. and Espec Corp. Our principal competitor for thermal platforms is Environmental Stress Systems Inc.

Our principal competitors for manipulator products are Esmo AG and Reid-Ashman Manufacturing. Our principal competitors for docking hardware products include Esmo AG, Knight Automation and Reid-Ashman Manufacturing. We also compete with the ATE manufacturers Advantest Corporation and Teradyne, Inc. (who are also our customers) on the sale of docking hardware and manipulators.

Our principal competitors for tester interface products are Reid-Ashman Manufacturing, Esmo AG, Teradyne, Inc., and Advantest Corporation.

- 12 -

 

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 1.
   BUSINESS (Continued)

BACKLOG

At December 31, 2014, our backlog of unfilled orders for all products was approximately $3.8 million compared with approximately $3.1 million at December 31, 2013. Our backlog includes customer orders which we have accepted, substantially all of which we expect to deliver in 2015. While backlog is calculated on the basis of firm purchase orders, a customer may cancel an order or accelerate or postpone currently scheduled delivery dates. Our backlog may be affected by the tendency of customers to rely on shorter lead times available from suppliers, including us, in periods of depressed demand. In periods of increased demand, there is a tendency towards longer lead times that has the effect of increasing backlog. As a result of these factors, our backlog at a particular date is not necessarily indicative of sales for any future period.

EMPLOYEES

At December 31, 2014, we had 125 full time employees, including 57 in manufacturing operations, 48 in customer support/operations and 20 in administration. Substantially all of our key employees are highly skilled and trained technical personnel. None of our employees are represented by a labor union, and we have never experienced a work stoppage. From time to time we retain third-party contractors to assist us in manufacturing operations and engineering and product development projects.

ADDITIONAL INFORMATION

Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K, and amendments to these reports that are filed with the SEC pursuant to Section 13(a) or 15(d) of the Exchange Act, are available free of charge through our website (www.intest.com) as soon as reasonably practicable after we electronically file them with, or furnish them to, the SEC.


Item 1A. RISK FACTORS

The following are some of the factors that could materially and adversely affect our future performance or could cause actual results to differ materially from those expressed or implied in our forward-looking statements. The risks and uncertainties described below are not the only ones facing us and we cannot predict every event and circumstance that may adversely affect our business. However, these risks and uncertainties are the most significant factors that we have identified at this time. If one or more of these risks actually occurs, our business, results of operations, and/or financial condition would likely suffer, and the price of our stock could be negatively affected.

Our sales are affected by the cyclicality and seasonality of the semiconductor and ATE markets, which causes our operating results to fluctuate significantly.

Our business depends in significant part upon the capital expenditures of semiconductor manufacturers. Capital expenditures by these companies depend upon, among other things, the current and anticipated market demand for semiconductors and the products that utilize them. Typically, semiconductor manufacturers curtail capital expenditures during periods of economic downturn. Conversely, semiconductor manufacturers increase capital expenditures when market demand requires the addition of new or expanded production capabilities or the reconfiguration of existing fabrication facilities to accommodate new products. In addition to being cyclical, the ATE market has also developed a seasonal pattern in the last several years, with the second and third quarters being the periods of strong demand and the first and fourth quarters being periods of weakened demand. We believe this change has been driven by the strong demand for consumer products containing semiconductor content sold during the year-end holiday shopping season. These market changes and seasonal sales pattern have contributed in the past, and will likely continue to contribute in the future, to fluctuations in our operating results.


- 13 -


inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014

Item 1A. RISK FACTORS (Continued)

Our business is subject to intense competition.

We face significant competition throughout the world in each of our product segments. Some of our competitors have substantial financial resources and more extensive design and production capabilities than we do. In order to remain competitive, we must be able to continually commit a significant portion of our personnel and financial resources to developing new products and maintaining customer satisfaction worldwide. We expect our competitors to continue to improve the performance of their current products and introduce new products or technologies. Over the last several years, in response to significant declines in global demand for our products, some competitors have reduced their product pricing significantly, which has led to intensified price based competition, which has and could continue to materially adversely affect our business, financial condition and results of operations.

We seek to further diversify the markets for our thermal products in order to increase the proportion of our sales attributable to markets which are less subject to cyclicality than the semiconductor and ATE markets. If we are unable to do so, our future performance will remain substantially exposed to the fluctuations of the cyclicality of the semiconductor and ATE markets.

Since 2009, we have sold our thermal products in markets outside of the ATE market, including the automotive, consumer electronics, defense/aerospace, energy, industrial and telecommunications markets. Our sales to these non-ATE markets were $11.1 million in both 2014 and 2013 and represented 27% and 28%, respectively, of our consolidated net revenues. Our goal is to increase our sales into these and other non-ATE markets; however, in most cases, the expansion of our thermal product sales into these new markets has occurred in the last several years, and we may experience difficulty in expanding our sales efforts further into these markets. These difficulties could include hiring sales and marketing staff with sufficient experience selling into these new markets and our ability to continue to develop products which meet the needs of customers in these markets and which are not currently offered by our competitors. If we are unable to expand our sales in non-ATE markets, our net revenues and results of operations will remain substantially dependent upon the cycles of the semiconductor and ATE markets.

We seek to acquire additional businesses. If we are unable to do so, our future rate of growth may be reduced or limited.

A key element of our growth strategy is to acquire businesses, technologies or products that are complementary to our current product offerings. We seek to make acquisitions that will further expand our product lines as well as increase our exposure to markets outside the ATE market. We may not be able to execute our acquisition strategy if:

Our acquisition strategy involves financial and management risks which may adversely affect our results in the future.

If we acquire additional businesses, technologies or products, we will face the following additional risks:

If any of the events described above occur, our earnings could be reduced. If we issue shares of our stock or other rights to purchase our stock in connection with any future acquisitions, we would dilute our existing stockholders' interests and our earnings per share may decrease. If we issue debt in connection with any future acquisitions, lenders may impose covenants on us which could, among other things, restrict our ability to increase capital expenditures or to acquire additional businesses.

- 14 -


inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014

Item 1A. RISK FACTORS (Continued)

Our operating results often change significantly from quarter to quarter and may cause fluctuations in our stock price.

Historically, our operating results have fluctuated significantly from quarter to quarter. We believe that these fluctuations occur primarily due to the cycles of demand in the semiconductor manufacturing industry. In addition to the changing cycles of demand in the semiconductor manufacturing industry, other factors that have caused our quarterly operating results to fluctuate in the past, and that may cause fluctuations and losses in the future, include:

Because the market price of our common stock has tended to vary based on, and in relation to, changes in our operating results, fluctuations in the market price of our stock are likely to continue as variations in our quarterly results continue.

Changes in the buying patterns of our customers have affected, and may continue to affect, demand for our products and our gross and net operating margins. Such changes in patterns are difficult to predict and may not be immediately apparent.


In addition to the cyclicality and seasonality of the semiconductor and ATE markets, demand for our products and our gross and net operating margins have also been affected by changes in the buying patterns of our customers. We believe that in recent years there have been a variety of changes within the ATE market, including, for example, changing product requirements, longer time periods between new product offerings by OEMs and changes in customer buying patterns. In particular, demand for our mechanical and electrical products, which are sold exclusively within the ATE market, and our operating margins in these product segments have been affected by shifts in the competitive landscape, including (i) customers placing heightened emphasis on shorter lead times (which places increased demands on our available engineering and production capacity increasing unit costs) and ordering in smaller quantities (which prevents us from acquiring component materials in larger volumes at lower cost and increasing unit costs), (ii) the increasing practice of OEM manufacturers to specify other suppliers as primary vendors, with less frequent opportunities to compete for such designations, (iii) customers requiring products with a greater range of use at the lowest cost, and (iv) customer supply chain management groups demanding lower prices and spreading purchases across multiple vendors.

- 15 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014

Item 1A. RISK FACTORS (Continued)

These shifts in market practices have had, and may continue to have, varying degrees of impact on our net revenues and our gross and net operating margins. Such shifts are difficult to predict and may not be immediately apparent, and the impact of these practices is difficult to quantify from period to period. There can be no assurance that we will be successful in implementing effective strategies to counter these shifts.

We generate a large portion of our sales from a small number of customers. If we were to lose one or more of our large customers, operating results could suffer dramatically.

Texas Instruments Incorporated accounted for 13% of our consolidated net revenues in both 2014 and 2013, respectively. While all three of our operating segments sold to this customer, these revenues were primarily generated by our Mechanical Products and Electrical Products segments. Hakuto Co. Ltd. accounted for 11% of our consolidated net revenues in 2014. These revenues were generated by our Thermal Products segment. Our ten largest customers accounted for approximately 48% and 47% of our net revenues in 2014 and 2013, respectively. The loss of any one or more of our largest customers, or a reduction in orders by a major customer, could materially reduce our net revenues or otherwise materially affect our business, financial condition or results of operations.

We have experienced and may continue to experience significant variability in our effective tax rates and may have exposure to additional tax liabilities and costs.

We are subject to paying income taxes in the U.S. and various other countries in which we operate. Our effective tax rate is dependent on where our earnings are generated and the tax regulations and the interpretation and judgment of administrative tax or revenue entities in the U.S. and other countries. We are also subject to tax audits in the countries where we operate. Any material assessment resulting from an audit from an administrative tax or revenue entity could negatively affect our financial results.

Our industry is subject to rapid technological change, and our business prospects would be negatively affected if we are unable to quickly and effectively respond to innovation in the semiconductor and ATE markets.

Semiconductor technology continues to become more complex as manufacturers incorporate ICs into an increasing variety of products. This trend, and the changes needed in automatic testing systems to respond to developments in the semiconductor market, are likely to continue. We cannot be certain that we will be successful or timely in developing, manufacturing or selling products that will satisfy customer needs or that will attain market acceptance. Our failure to provide products that effectively and timely meet customer needs or gain market acceptance will negatively affect our business prospects.

New regulations related to conflict minerals may adversely affect us.

The Dodd-Frank Wall Street Reform and Consumer Protection Act imposes new disclosure requirements regarding the use of "conflict" minerals mined from the Democratic Republic of Congo and adjoining countries in our products. This new requirement could affect the pricing, sourcing and availability of minerals used in the manufacture of components we use in our products. In addition, there will be additional costs associated with complying with the disclosure requirements, such as costs related to determining the source of any conflict minerals used in our products. Our supply chain is complex and we may be unable to verify the origins for all metals used in our products. As a result, we may be unable to certify that our products are conflict mineral free.

A breach of our operational or security systems could negatively affect our business and results of operations.

We rely on various information technology networks and systems, some of which are managed by third parties, to process, transmit and store electronic information, including confidential data, and to carry out and support a variety of business activities, including manufacturing, research and development, supply chain management, sales and accounting. A failure in or a breach of our operational or security systems or infrastructure, or those of our suppliers and other service providers, including as a result of cyber attacks, could disrupt our business, result in the disclosure or misuse of proprietary or confidential information, damage our reputation, cause losses and increase our costs.

- 16 -

 

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014

Item 1A. RISK FACTORS (Continued)

If our suppliers do not meet product or delivery requirements, we could have reduced revenues and earnings.

Certain components may be in short supply from time to time because of high demand or the inability of some vendors to consistently meet our quality or delivery requirements. A significant portion of our material purchases require some custom work and there are not always multiple suppliers capable of performing such custom work on a timely or cost effective basis. If any of our suppliers were to cancel commitments or fail to meet quality or delivery requirements needed to satisfy customer orders for our products, we could lose time-sensitive customer orders, have reduced revenues and earnings, and be subject to contractual penalties, any of which could have a material adverse effect on our business, results of operations and financial condition.

New statutory and regulatory requirements, tax increases and changes in government spending could adversely affect our operating results.

In recent years, the Federal government launched an aggressive statutory and regulatory agenda with the goal of enacting social and economic reforms.  This agenda includes health care reform legislation and financial system regulatory reform, as well as proposed climate change and other environmental legislation and regulations. In addition, the Federal and many state and local governments are faced with budget crises that are causing these bodies to consider enacting significant tax increases, reducing or eliminating the use of net operating loss carryforwards and making significant budget cuts.  It is uncertain how the applicable government agencies will enact the regulations necessary to carry out the statutory requirements.  Accordingly, we cannot determine the costs and other effects of new legal requirements with certainty.  For example, new legislation or regulations may cause us to experience increased costs as a direct result of our compliance efforts.  At this point, we are unable to determine the impact that newly enacted federal healthcare legislation could have on our employer-sponsored medical plans. We may also indirectly experience increased costs to the extent such legal requirements increase the prices of goods and services that we purchase as a result of increased compliance costs to the vendors who provide these goods and services to us or the reduced availability of raw materials that we need to purchase.  In addition, we cannot determine the impact that new legal requirements, tax increases or state and local government spending cuts will have on the business operations of our customers, where significant increases in operating costs due to the costs to comply with new legal requirements or tax increases may reduce their future product development and capital spending budgets. Our revenues and results of operations may be adversely affected by these new legal requirements and government actions.

Our business may suffer if we are unable to attract and retain key employees.

The loss of key personnel could adversely affect our ability to manage our business effectively. Our future success will depend largely upon the continued services of our senior management and other key employees or the development of successors with commensurate skills and talents. In the past, during periods of weakened demand which has caused us to experience operating losses, we have implemented temporary salary and benefit reductions and eliminations that have remained in place until our operations returned to profitability. As global economic conditions improve and employment opportunities increase, if we are unable to increase employee salaries and maintain employee benefits commensurate with competitive opportunities, we may not be able to retain our senior management and other key employees. Our business could suffer if we were to lose one of more of our senior officers or other key employees.

If we are not able to obtain patents on or otherwise preserve and protect our proprietary technologies, our business may suffer.

We have obtained domestic and foreign patents covering some of our products which expire between the years 2015 and 2033, and we have applications pending for additional patents. Some of our products utilize proprietary technology that is not covered by a patent or similar protection, and, in many cases, cannot be protected. We cannot be certain that:

- 17 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014

Item 1A. RISK FACTORS (Continued)

If we cannot obtain patent or other protection for our proprietary technologies, our ability to compete in our markets could be impaired.

Claims of intellectual property infringement by or against us could seriously harm our businesses.

From time to time, we may be forced to respond to or prosecute intellectual property infringement claims to defend or protect our rights or a customer's rights. These claims, regardless of merit, may consume valuable management time, result in costly litigation or cause product shipment delays. Any of these factors could seriously harm our business and operating results. We may have to enter into royalty or licensing agreements with third parties who claim infringement. These royalty or licensing agreements, if available, may be costly to us. If we are unable to enter into royalty or licensing agreements with satisfactory terms, our business could suffer. In instances where we have had reason to believe that we may be infringing the patent rights of others, or that someone may be infringing our patent rights, we have asked our patent counsel to evaluate the validity of the patents in question, as well as the potentially infringing conduct. If we become involved in a dispute, neither the third parties nor the courts are bound by our counsel's conclusions.

A substantial portion of our customers are located outside the U.S., which exposes us to foreign political and economic risks.

We have operated internationally for many years and expect to expand our international operations as necessary to continue expansion of our sales and service to our non-U.S. customers. Our foreign subsidiaries generated 15% and 16% of consolidated net revenues in 2014 and 2013, respectively. Net revenues from foreign customers totaled $27.4 million, or 66% of consolidated net revenues in 2014 and $26.1 million, or 66% of consolidated net revenues in 2013. We expect our net revenues from foreign customers will continue to represent a significant portion of total net revenues. However, in addition to the risks generally associated with sales and operations in the U.S., sales to customers outside the U.S. and operations in foreign countries are subject to additional risks, which may, in the future, affect our operations. These risks include:

A significant portion of our cash position is maintained overseas.

While much of our cash is in the U.S., a significant portion is generated from and maintained by our foreign operations. As of December 31, 2014, $3.1 million of our cash and cash equivalents was held by our foreign subsidiaries. Our financial condition and results of operations could be adversely impacted if we are unable to maintain a sufficient level of cash flow in the U.S. to address our cash requirements or we are unable to efficiently and timely repatriate cash from overseas. Any payment of distributions, loans or advances to us by our foreign subsidiaries could be subject to restrictions on, or taxation of, dividends or repatriation of earnings under applicable local law, monetary transfer restrictions and foreign currency exchange regulations in the jurisdictions in which our subsidiaries operate. If we are unable to repatriate the earnings of our subsidiaries it could have an adverse impact on our ability to redeploy earnings in other jurisdictions where they could be used more profitably.

- 18 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 1B.   UNRESOLVED STAFF COMMENTS

None.


Item 2.   PROPERTIES

At December 31, 2014, we leased 5 facilities worldwide. The following chart provides information regarding each of our principal facilities that we occupied at December 31, 2014:



Location


Lease
Expiration

Approx.
Square
Footage



Principal Uses

Mt. Laurel, NJ

4/21

54,897

Corporate headquarters and Mechanical Products segment operations.

Mansfield, MA

8/21

52,700

Thermal Products segment operations.

Fremont, CA

9/17

15,746

Electrical Products segment operations.

All of our facilities have space to accommodate our needs for the foreseeable future.

Item 3.   LEGAL PROCEEDINGS

From time to time we may be a party to legal proceedings occurring in the ordinary course of business. We are not currently involved in any material legal proceedings.

Item 4.   MINE SAFETY DISCLOSURES

Not applicable. 



PART II


Item 5.   MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Since October 15, 2013, our common stock has been traded on NYSE MKT under the symbol "INTT." Prior to that, our common stock was traded on the NASDAQ under the symbol "INTT". The following table sets forth the high and low sale prices of our common stock, as reported on the NYSE MKT LLC or the NASDAQ Capital Market, as the case may be, for the periods indicated. Sale prices have been rounded to the nearest full cent.

 

Sales Price

2014

High

Low

First Quarter

$4.44

$3.69

Second Quarter

4.25

3.66

Third Quarter

5.75

3.87

Fourth Quarter

4.80

3.98

 

- 19 -

 

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 5.   MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES (Continued)

 

Sales Price

2013

High

Low

First Quarter

$3.55

$2.63

Second Quarter

3.87

2.81

Third Quarter

4.25

3.75

Fourth Quarter

4.13

3.66

On March 20, 2015, the closing price for our common stock as reported on the NYSE MKT LLC was $4.15. As of March 20, 2015, we had 10,562,678 shares outstanding that were held of record by approximately 1,000 beneficial and record holders.

No dividends were paid on our common stock in the years ended December 31, 2014 or 2013. We do not currently plan to pay cash dividends in the foreseeable future. Our current policy is to retain any future earnings for reinvestment in the operation and expansion of our business, including possible acquisitions of other businesses, technologies or products. Payment of any future dividends will be at the discretion of our Board of Directors.


Item 6.   SELECTED FINANCIAL DATA

The following table contains certain selected consolidated financial data of inTEST and is qualified by the more detailed Consolidated Financial Statements and Notes thereto included elsewhere in this Annual Report on Form 10-K and should be read in conjunction with "Management's Discussion and Analysis of Financial Condition and Results of Operations" and the other financial information included in this Annual Report on Form 10-K.

 

Years Ended December 31,

 

2014

2013

2012

2011

2010

Condensed Consolidated Statement of Operations Data:

(in thousands, except per share data)

Net revenues

$41,796

$39,426

$43,376

$47,266

$46,204

Gross margin

20,462

19,015

19,059

22,893

22,145

Operating income

4,916

3,962

2,996

7,578

7,350

Net earnings

3,439

3,077

2,156

9,863

7,252

Net earnings per common share:

 

 

 

 

 

     Basic

$0.33

$0.30

$0.21

$0.97

$0.72

     Diluted

$0.33

$0.30

$0.21

$0.96

$0.72

Weighted average common shares outstanding :

 

 

 

 

 

     Basic

10,432

10,364

10,273

10,148

10,019

     Diluted

10,466

10,419

10,347

10,286

10,142

 

 

 

As of December 31,

 

2014

2013

2012

2011

2010

Condensed Consolidated Balance Sheet Data:

(in thousands)

Cash and cash equivalents

$23,126

$19,018

$15,576

$13,957

$  6,895

Working capital

28,561

24,749

21,000

19,759

11,793

Total assets

38,738

35,481

32,399

31,237

21,408

Long-term debt, net of current portion

-

-

-

-

-

Total stockholders' equity

34,368

31,149

27,820

26,199

16,104


- 20 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 7.   MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Risk Factors and Forward-Looking Statements

In addition to historical information, this discussion and analysis contains statements relating to possible future events and results that are considered "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. These statements can often be identified by the use of forward-looking terminology such as "believes," "expects," "intends," "may," "will," "should" or "anticipates" or similar terminology. See Part I, Item 1 - "Business - Cautionary Statement Regarding Forward-Looking Statements" for examples of statements made in this report which may be "forward-looking statements." These statements involve risks and uncertainties and are based on various assumptions. Although we believe that our expectations are based on reasonable assumptions, investors and prospective investors are cautioned that such statements are only projections, and there cannot be any assurance that these events or results will occur. Information about the primary risks and uncertainties that could cause our actual future results to differ materially from our historic results or the results described in the forward-looking statements made in this report or presented elsewhere by Management from time to time are included in Part I, Item 1A - "Risk Factors."

Overview

This MD&A should be read in conjunction with the accompanying consolidated financial statements.

Our business and results of operations are substantially dependent upon the demand for ATE by semiconductor manufacturers and companies that specialize in the testing of ICs. Demand for ATE is driven by semiconductor manufacturers that are opening new, or expanding existing, semiconductor fabrication facilities or upgrading existing equipment, which in turn is dependent upon the current and anticipated market demand for semiconductors and products incorporating semiconductors. Such market demand can be the result of market expansion, development of new technologies or redesigned products to incorporate new features. In addition, we continue to focus on design improvements and new approaches for our own products which contribute to our net revenues as our customers adopt these new products.

In the past, the semiconductor industry has been highly cyclical with recurring periods of oversupply, which often have a severe impact on the semiconductor industry's demand for ATE, including the products we manufacture. This can cause wide fluctuations in both our orders and net revenues and, depending on our ability to react quickly to these shifts in demand, can significantly impact our results of operations. ATE market cycles are difficult to predict and in recent years have become more volatile and, in certain cases, shorter in duration. Because the market cycles are generally characterized by sequential periods of growth or declines in orders and net revenues during each cycle, year over year comparisons of operating results may not always be as meaningful as comparisons of periods at similar points in either up or down cycles. In addition, during both downward and upward cycles in our industry, in any given quarter, the trend in both our orders and net revenues can be erratic. This can occur, for example, when orders are canceled or currently scheduled delivery dates are accelerated or postponed by a significant customer or when customer forecasts and general business conditions fluctuate during a quarter. In addition to being cyclical, the ATE market has also developed a seasonal pattern in the last several years, with the second and third quarters being the periods of strong demand and the first and fourth quarters being periods of weakened demand. We believe this change has been driven by the strong demand for consumer products containing semiconductor content sold during the year-end holiday shopping season.

As part of our diversification strategy to reduce the impact of ATE market volatility on our business operations, we market our Thermostream temperature management systems in markets outside the ATE market, such as the automotive, consumer electronics, defense/aerospace, energy, industrial and telecommunications markets. We believe that these markets usually are less cyclical than the ATE market. However, because we are a recent market entrant in these markets, we have not yet developed meaningful market shares in these non-ATE markets. Consequently, we are continuing to evaluate customer buying patterns and market trends in these non-ATE markets. In addition, our orders and net revenues in any given period in these markets do not necessarily reflect the overall trends in these non-ATE markets due to our limited market shares. The level of our orders and net revenues from these non-ATE markets has varied in the past, and we expect will vary significantly in the future, as we work to build our presence in these markets and establish new markets for our products.


- 21 -


inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 7.
  MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS (Continued)

While the majority of our orders and net revenues are derived from the ATE market, our operating results do not always follow the overall trend in the ATE market in any given period. We believe that these anomalies may be driven by a variety of changes within the ATE market, including, for example, changing product requirements, longer time periods between new product offerings by OEMs and changes in customer buying patterns. In particular, demand for our mechanical and electrical products, which are sold exclusively within the ATE market, and our operating margins in these product segments have been affected by shifts in the competitive landscape, including (i) customers placing heightened emphasis on shorter lead times (which places increased demands on our available engineering and production capacity increasing unit costs) and ordering in smaller quantities (which prevents us from acquiring component materials in larger volumes at lower cost and increasing unit costs), (ii) the practice of OEM manufacturers to specify other suppliers as primary vendors, with less frequent opportunities to compete for such designations, (iii) the role of third-party test and assembly houses in the ATE market and their requirement of products with a greater range of use at the lowest cost, (iv) customer supply chain management groups demanding lower prices and spreading purchases across multiple vendors, and (v) certain competitors aggressively reducing their products' sales prices (causing us to either reduce our products' sales price to be successful in obtaining the sale or causing loss of the sale).

In addition, in recent periods we have seen instances where demand for ATE is not consistent for each of our product segments or for any given product within a particular product segment. This inconsistency in demand for ATE can be driven by a number of factors, but in most cases we have found the primary reason is unique customer-specific changes in demand for certain products driven by the needs of their customers or markets served. These shifts in market practices and customer-specific needs have had, and may continue to have, varying levels of impact on our operating results and are difficult to quantify or predict from period to period. Management has taken, and will continue to take, such actions it deems appropriate to adjust our strategies, products and operations to counter such shifts in market practices as they become evident.

Orders and Backlog

The following table sets forth, for the periods indicated, a breakdown of the orders received both by product segment and market.

 

Years Ended
December 31,


  Change  

Orders:

2014

2013

   $   

 % 

Thermal Products

$23,866 

$21,953 

$1,913 

9%

Mechanical Products

11,363 

10,115 

1,248 

12  

Electrical Products

   7,212 

   6,291 

   921 

15  

 

$42,441 

$38,359 

$4,082 

11%

 

 

 

 

 

ATE market

$30,214 

$27,875 

$2,339 

8%

Non-ATE market

  12,227 

  10,484 

  1,743 

17  

 

$42,441 

$38,359 

$4,082 

11%

Total consolidated orders for the year ended December 31, 2014 were $42.4 million compared to $38.4 million for 2013. The increase in consolidated orders reflects higher levels of demand from the ATE market, as well as the success of new product introductions in our Mechanical and Electrical Products segment and continued penetration into non-ATE markets by our Thermal Products segment.

Orders from customers in various markets outside of the ATE market for the year ended December 31, 2014, grew by 17% during 2014 as compared to 2013 and increased from 27% of our consolidated orders in 2013 to 29% in 2014. We believe the increases in both our orders from customers in various markets outside the ATE market and those orders as a percentage of our consolidated orders reflect improved demand from the customers we serve in several of the markets outside the ATE market, including the defense/aerospace and telecommunications markets. The level of our orders in these non-ATE markets has varied in the past, and we expect it will vary significantly in the future as we build our presence in these markets and establish new markets for our products.

- 22 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 7.   MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS (Continued)

At December 31, 2014, our backlog of unfilled orders for all products was approximately $3.8 million compared with approximately $3.1 million at December 31, 2013. Our backlog includes customer orders which we have accepted, substantially all of which we expect to deliver in 2015. While backlog is calculated on the basis of firm purchase orders, a customer may cancel an order or accelerate or postpone currently scheduled delivery dates. Our backlog may be affected by the tendency of customers to rely on short lead times available from suppliers, including us, in periods of depressed demand. In periods of increased demand, there is a tendency towards longer lead times that has the effect of increasing backlog. As a result, our backlog at a particular date is not necessarily indicative of sales for any future period.

Net Revenues

The following table sets forth, for the periods indicated, a breakdown of the net revenues both by product segment and market.

 

Years Ended
December 31,


  Change  

Net revenues:

2014

2013

   $   

 % 

Thermal Products

$23,446 

$22,962 

$  484 

2%

Mechanical Products

11,245 

9,962 

1,283 

13  

Electrical Products

   7,105 

   6,502 

   603 

 9  

 

$41,796 

$39,426 

$2,370 

 6%

 

 

 

 

 

ATE market

$30,737 

$28,346 

$2,391 

8%

Non-ATE market

  11,059 

  11,080 

     (21)

 -  

 

$41,796 

$39,426 

$2,370 

 6%

Total consolidated net revenues for the year ended December 31, 2014 were $41.8 million compared to $39.4 million for 2013. The increase in consolidated net revenues primarily reflects the aforementioned higher levels of demand from the ATE market, as well as the success of new product introductions in our Mechanical and Electrical Products segment. In addition, the higher percentage increase for our Mechanical Products segment also reflects that one particular customer of this segment was building a new facility in Southeast Asia during 2014 and, as a result, had a higher level of demand for certain of our products during 2014. Net revenues from customers in markets outside the ATE market were relatively unchanged at $11.1 million in both 2014 and 2013. As a percentage of our total consolidated net revenues, they represented 27% and 28% in 2014 and 2013, respectively.

Product/Customer Mix

Our three product segments each have multiple products that we design, manufacture and market to our customers. Due to a number of factors, our products have varying levels of gross margin. The mix of products we sell in any period is ultimately determined by our customers' needs. Therefore, the mix of products sold in any given period can change significantly from the prior period. As a result, our consolidated gross margin can be significantly impacted in any given period by a change in the mix of products sold in that period.

We sell most of our products to semiconductor manufacturers and third-party test and assembly houses (end user sales) and to ATE manufacturers (OEM sales) who ultimately resell our equipment with theirs to semiconductor manufacturers. Our Thermal Products segment also sells into a variety of other markets including the automotive, consumer electronics, defense/aerospace, energy, industrial and telecommunications markets. The mix of customers during any given period will affect our gross margin due to differing sales discounts and commissions. For the years ended December 31, 2014 and 2013, our OEM sales as a percentage of net revenues were 9% and 12%, respectively.

 

- 23 -

 

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 7.   MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS (Continued)

OEM sales generally have a lower gross margin than end user sales, as OEM sales historically have had a more significant discount. Our current net operating margins on most OEM sales, however, are only slightly less than margins on end user sales because of the payment of third party sales commissions on most end user sales. We have also continued to experience demands from our OEM customers' supply chain managers to reduce our sales prices to them. If we cannot further reduce our manufacturing and operating costs, these pricing pressures will negatively affect our gross and operating margins.

Results of Operations

The results of operations for our three product segments are generally affected by the same factors. Separate discussions and analyses for each product segment would be repetitive and obscure any unique factors that affected the results of operations of our different product segments. The discussion and analysis that follows, therefore, is presented on a consolidated basis and includes discussion of factors unique to each product segment where significant to an understanding of that segment.

Year Ended December 31, 2014 Compared to Year Ended December 31, 2013

Net Revenues. Net revenues were $41.8 million for the year ended December 31, 2014 compared to $39.4 million for the same period in 2013, an increase of $2.4 million or 6%. For the year ended December 31, 2014, the net revenues of our Thermal, Mechanical and Electrical Products segments increased $484,000 or 2%, $1.3 million or 13% and $603,000 or 9%, respectively. We believe the increase in our net revenues during 2014 primarily reflects the factors previously discussed in the Overview.

Gross Margin. Gross margin was 49% for the year ended December 31, 2014 compared to 48% for the same period in 2013. The improvement in the gross margin was primarily the result of our fixed operating costs being more fully absorbed by the higher net revenue levels in 2014 as compared to 2013. In absolute dollar terms, these costs increased $78,000 from 2013 to 2014 but as a percentage of net revenues, these costs declined from 15% in 2013 to 14% in 2014. Higher levels of depreciation and facility related costs, primarily in our Thermal Products segment, were partially offset by better utilization rates for our machine shop operation in our Mechanical Products segment and reductions in salary and benefits expense in our Thermal Products segment.

Selling Expense. Selling expense was $5.7 million for the year ended December 31, 2014 compared to $5.4 million for the same period in 2013, an increase of $340,000 or 6%. The increase primarily reflects higher salaries and benefits expense as a result of an increase in headcount in our Thermal and Electrical Products segments and higher levels of commissions as a result of the increase in our consolidated net revenues. 

Engineering and Product Development Expense. Engineering and product development expense was $3.6 million for the year ended December 31, 2014 compared to $3.7 million for the same period in 2013, a decrease of $103,000 or 3%. The decrease in engineering and product development expense primarily reflects a reduction in the use of third party consultants in our Thermal Products segment and decreased spending on matters related to our intellectual property. These decreases were partially offset by an increase in salaries and benefits expense, primarily reflecting annual salary increases for existing employees and an increase in headcount in our Electrical Products segment.

General and Administrative Expense. General and administrative expense was $6.2 million for the year ended December 31, 2014 compared to $6.0 million for the same period in 2013, an increase of $256,000 or 4%. The increase primarily reflects an increase in the use of third-party professionals who assist us with certain of our strategic initiatives and, to a lesser extent, higher levels of travel related costs in implementing these initiatives. This increase was partially offset by a reduction in amortization expense related to our intangible assets in our Thermal Products segment.

Income Tax Expense. For the year ended December 31, 2014, we recorded income tax expense of $1.5 million compared to $931,000 for the same period in 2013. Our effective tax rate was 30% for 2014 compared to 23% for 2013. On a quarterly basis, we record income tax expense or benefit based on the expected annualized effective tax rate for the various taxing jurisdictions in which we operate our businesses. The increase in our effective tax rate in 2014 as compared to 2013 primarily reflects the lower level of tax credits available to offset current tax expense in 2014, as well as the impact of the recording of additional benefits during 2013 as a result of the finalization of an audit of our German operation in September of that year.

- 24 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014

Item 7.   MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS (Continued)

Liquidity and Capital Resources

As discussed more fully in the Overview, our business and results of operations are substantially dependent upon the demand for ATE by semiconductor manufacturers and companies that specialize in the testing of ICs. The cyclical and volatile nature of demand for ATE makes estimates of future revenues, results of operations and net cash flows difficult.

Our primary historical source of liquidity and capital resources has been cash flow generated by our operations and we manage our businesses to maximize operating cash flows as our primary source of liquidity. We use cash to fund growth in our operating assets, for new product research and development and for acquisitions.

Liquidity

Our cash and cash equivalents and working capital were as follows:

 

December 31,

 

2014

2013

Cash and cash equivalents

$23,126   

$19,018   

Working capital

$28,561   

$24,749   

As of December 31, 2014, $3.1 million of our cash and cash equivalents was held by our foreign subsidiaries. If these funds are needed for our operations in the U.S., we may be required to accrue and pay foreign taxes if we repatriate certain of these funds. On February 25, 2015 we repatriated $883,000 from our subsidiary in Singapore. We currently plan to indefinitely reinvest the funds held by our subsidiary in Germany.

We currently expect our cash and cash equivalents and projected future cash flow to be sufficient to support our short term working capital requirements. However, we may need additional financial resources to consummate a significant acquisition if the consideration in such a transaction would require us to utilize a substantial portion of our available cash. We do not currently have any credit facilities under which we can borrow to help fund our working capital or other requirements.

Cash Flows

Operating Activities.
Net cash provided by operations for the year ended December 31, 2014 was $5.1 million. During 2014, we recorded net earnings of $3.4 million, which included non-cash charges of $879,000 for depreciation and amortization, $344,000 for excess and obsolete inventory charges and $318,000 of deferred income tax expense. During 2014, accounts receivable decreased $610,000, compared to the levels at the end of 2013, primarily reflecting an improvement in customer payment patterns. During 2014, inventories and accounts payable increased $893,000 and $172,000, respectively, compared to the levels at the end of 2013. The increase in inventory primarily reflects increased finished goods inventory on hand at December 31, 2014 that will be shipped to customers in early 2015. The increase in accounts payable primarily reflects the timing of payments to customers. During 2014, restricted certificates of deposit decreased $100,000. Our restricted certificates of deposit are pledged to secure letters of credit issued as security deposits for certain of our domestic leases. In accordance with the terms of the lease for our facility in Mansfield, Massachusetts, after reaching the thirty-seventh month of the term of the lease with no events of default having occurred, we requested and received approval to reduce the amount of the letter of credit by $100,000.

Investing Activities. During 2014, purchases of property and equipment were $831,000 which primarily represent additions to leased systems in our Thermal and Mechanical Products segments and additional production testing and demonstration equipment for our Electrical Products segment. We have no significant commitments for capital expenditures for 2015, however, depending upon changes in market demand, we may make such purchases as we deem necessary and appropriate.

Financing Activities. During 2014, there were no cash flows from financing activities.

-25 -

 

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 7.   MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS (Continued)

New or Recently Adopted Accounting Standards

See Note 2 to the consolidated financial statements for information concerning the implementation and impact of new or recently adopted accounting standards.

Critical Accounting Policies

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, expenses and related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate our estimates, including those related to inventories, long-lived assets, goodwill, identifiable intangibles and deferred income tax valuation allowances. We base our estimates on historical experience and on appropriate and customary assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Some of these accounting estimates and assumptions are particularly sensitive because of their significance to our consolidated financial statements and because of the possibility that future events affecting them may differ markedly from what had been assumed when the financial statements were prepared.

Inventory Valuation

Inventories are valued at cost on a first-in, first-out basis, not in excess of market value. On a quarterly basis, we review our inventories and record excess and obsolete inventory charges based upon our established objective excess and obsolete inventory criteria. These criteria identify material that has not been used in a work order during the prior twelve months and the quantity of material on hand that is greater than the average annual usage of that material over the prior three years. In certain cases, additional excess and obsolete inventory charges are recorded based upon current market conditions, anticipated product life cycles, new product introductions and expected future use of the inventory. The excess and obsolete inventory charges we record establish a new cost basis for the related inventories. During 2014 and 2013, we recorded inventory obsolescence charges for excess and obsolete inventory of $344,000 and $311,000, respectively.

Goodwill, Intangible and Long-Lived Assets

We account for goodwill and intangible assets in accordance with Accounting Standards Codification ("ASC") 350 (Intangibles- Goodwill and Other). Finite-lived intangible assets are amortized over their estimated useful economic life and are carried at cost less accumulated amortization. Goodwill is assessed for impairment at least annually in the fourth quarter, on a reporting unit basis, or more frequently when events and circumstances occur indicating that the recorded goodwill may be impaired. As a part of the goodwill impairment assessment, we have the option to perform a qualitative assessment to determine whether it is more-likely-than-not that the fair value of a reporting unit is less than its carrying amount. If we determine this is the case, we are required to perform a two-step goodwill impairment test to identify potential goodwill impairment and measure the amount of goodwill impairment loss to be recognized. The two-step test is discussed below. If we determine that it is more-likely-than-not that the fair value of the reporting unit is greater than its carrying amounts, the two-step goodwill impairment test is not required.

If we determine it is more-likely-than-not that the fair value of a reporting unit is less than its carrying amount as a result of our qualitative assessment, we will perform a quantitative two-step goodwill impairment test. In the Step I test, the fair value of a reporting unit is computed and compared with its book value. If the book value of a reporting unit exceeds its fair value, a Step II test is performed in which the implied fair value of goodwill is compared with the carrying amount of goodwill. If the carrying amount of goodwill exceeds the implied fair value, an impairment loss is recorded in an amount equal to that excess. The two-step goodwill impairment assessment is based upon a combination of the income approach, which estimates the fair value of our reporting units based upon a discounted cash flow approach, and the market approach which estimates the fair value of our reporting units based upon comparable market multiples. This fair value is then reconciled to our market capitalization at year end with an appropriate control premium. The determination of the fair value of our reporting units requires management to make significant estimates and assumptions including the selection of appropriate peer group companies, control premiums, discount rate, terminal growth rates, forecasts of revenue and expense growth rates, changes in

- 26 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 7.   MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS (Continued)

working capital, depreciation, amortization and capital expenditures. Changes in assumptions concerning future financial results or other underlying assumptions could have a significant impact on either the fair value of the reporting unit or the amount of the goodwill impairment charge. As of December 31, 2014 and 2013, goodwill was $1.7 million. We did not record any impairment charges related to our goodwill during 2014 or 2013.

Indefinite-lived intangible assets are assessed for impairment at least annually in the fourth quarter, or more frequently if events or changes in circumstances indicate that the asset might be impaired. As a part of the impairment assessment, we have the option to perform a qualitative assessment to determine whether it is more likely than not that an indefinite-lived intangible asset is impaired. If, as a result of our qualitative assessment, we determine that it is more-likely-than-not that the fair value of the indefinite-lived intangible asset is less than its carrying amount, the quantitative impairment test is required. Otherwise, no further testing is required. The quantitative impairment test consists of a comparison of the fair value of the intangible asset with its carrying amount. If the carrying amount of the intangible asset exceeds its fair value, an impairment loss is recognized in an amount equal to that excess. As of December 31, 2014 and 2013, our indefinite-lived intangible asset was $510,000. We did not record any impairment charges related to our indefinite-lived intangible asset during 2014 or 2013.

Long-lived assets, which consist of finite-lived intangible assets and property and equipment, are assessed for impairment whenever events or changes in business circumstances indicate that the carrying amount of the assets may not be fully recoverable or that the useful lives of these assets are no longer appropriate. Each impairment test is based on a comparison of the estimated undiscounted cash flows to the recorded value of the asset. If impairment is indicated, the asset is written down to its estimated fair value. The cash flow estimates used to determine the impairment, if any, contain management's best estimates using appropriate assumptions and projections at that time. At December 31, 2014 and 2013, finite-lived intangibles and long-lived assets were $2.2 million and $2.5 million, respectively. We did not record any impairment charges related to our long-lived assets during 2014 or 2013.

Income Taxes

Deferred tax assets are analyzed to determine if there will be sufficient taxable income in the future in order to realize such assets. We assess all of the positive and negative evidence concerning the realizability of the deferred tax assets, including our historical results of operations for the recent past and our projections of future results of operations, in which we make subjective determinations of future events. If, after assessing all of the evidence, both positive and negative, a determination is made that the realizability of the deferred tax assets is not more likely than not, we establish a deferred tax valuation allowance for all or a portion of the deferred tax assets depending upon the specific facts. If any of the significant assumptions were changed, materially different results could occur, which could significantly change the amount of the deferred tax valuation allowance established. As of December 31, 2014 and 2013, we had a net deferred tax asset of $1.4 million and $1.7 million, respectively, and a deferred tax valuation allowance of $100,000 and $287,000, respectively.

Off -Balance Sheet Arrangements

There were no off-balance sheet arrangements during the year ended December 31, 2014 that have or are reasonably likely to have, a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that is material to our interests.


Item 7A.   QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

This disclosure is not required for a smaller reporting company.


Item 8.   FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Consolidated financial statements are set forth in this Report beginning at page F-1 and are incorporated by reference into this Item 8.

- 27 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 9.   CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

Item 9A.  CONTROLS AND PROCEDURES

CEO and CFO Certifications. Included with this Annual Report as Exhibits 31.1 and 31.2 are two certifications, one by each of our Chief Executive Officer and our Chief Financial Officer (the "Section 302 Certifications"). This Item 9A contains information concerning the evaluations of our disclosure controls and procedures and internal control over financial reporting that are referred to in the Section 302 Certifications. This information should be read in conjunction with the Section 302 Certifications for a more complete understanding of the topics presented.

Evaluation of Our Disclosure Controls and Procedures. The SEC requires that as of the end of the year covered by this Report, our CEO and CFO must evaluate the effectiveness of the design and operation of our disclosure controls and procedures and report on the effectiveness of the design and operation of our disclosure controls and procedures.

"Disclosure controls and procedures" mean the controls and other procedures that are designed with the objective of ensuring that information required to be disclosed in our reports filed under the Securities Exchange Act of 1934 (the "Exchange Act"), such as this Report, is recorded, processed, summarized and reported within the time periods specified in the rules and forms promulgated by the SEC. Disclosure controls and procedures are also designed with the objective of ensuring that such information is accumulated and communicated to our management, including the CEO and CFO, as appropriate, to allow timely decisions regarding required disclosure.

Limitations on the Effectiveness of Controls. Our management, including the CEO and CFO, does not expect that our disclosure controls and procedures or our internal control over financial reporting will prevent all error and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, as opposed to absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within an entity have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the control. The design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions; over time, a system of controls may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected. Accordingly, our management has designed the disclosure controls and procedures to provide reasonable assurance that the objectives of the control system were met.

CEO/CFO Conclusions about the Effectiveness of the Disclosure Controls and Procedures. As required by Rule 13a-15(b), inTEST management, including our CEO and CFO, conducted an evaluation as of the end of the period covered by this Report, of the effectiveness of our disclosure controls and procedures. Based on that evaluation, our CEO and CFO concluded that, as of the end of the period covered by this Report, our disclosure controls and procedures were effective at the reasonable assurance level.

Management's Report on Internal Control over Financial Reporting. Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is defined in Rule 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934, as amended, as a process designed by, or under the supervision of, our principal executive and principal financial officers and effected by our Board of Directors, management and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and includes those policies and procedures that:

- 28 -

 

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 9A.  CONTROLS AND PROCEDURES (Continued)

    1. Pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets;
    2. Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and
    3. Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of our assets that could have a material effect on the financial statements.

Because of inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Management assessed the effectiveness of our internal control over financial reporting as of December 31, 2014. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) on Internal Control-Integrated 1992 Framework. Based upon this assessment, management believes that, as of December 31, 2014, our internal control over financial reporting is effective at a reasonable assurance level.

This annual report does not include an attestation report of our independent registered public accounting firm regarding internal control over financial reporting, as such an attestation is not required pursuant to rules of the Securities and Exchange Commission applicable to smaller reporting companies.


Item 9B.   OTHER INFORMATION

None.


PART III


Item 10.   DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2015 Annual Meeting of Stockholders to be filed with the SEC on or before April 30, 2015, or, if our proxy statement is not filed on or before April 30, 2015, will be filed by that date by an amendment to this Form 10-K.

Item 11.   EXECUTIVE COMPENSATION

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2015 Annual Meeting of Stockholders to be filed with the SEC on or before April 30, 2015, or, if our proxy statement is not filed on or before April 30, 2015, will be filed by that date by an amendment to this Form 10-K.

Item 12.   SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

The information required by Item 201(d) of Regulation S-K is set forth below. The remainder of the information required by this Item 12 is incorporated by reference from our definitive proxy statement for our 2015 Annual Meeting of Stockholders to be filed with the SEC on or before April 30, 2015, or, if our proxy statement is not filed on or before April 30, 2015, will be filed by that date by an amendment to this Form 10-K.


- 29 -

inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2014


Item 12.   SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS (Continued)

The following table shows the number of securities that may be issued pursuant to our equity compensation plans (including individual compensation arrangements) as of December 31, 2014:

Equity Compensation Plan Information

 





Plan Category

Number of securities
to be issued upon
exercise of
outstanding options,
warrants and rights


Weighted-average
exercise price of
outstanding options,
warrants and rights

Number of securities
remaining available
for future issuance
under equity
compensation plans(1)

Equity compensation plans approved by security holders

-       

-           

557,500        

Equity compensation plans not approved by security holders

          -       

       -            

            -        

Total

          -       

       -            

557,500        

 

 

(1)

The securities that remain available for future issuance are issuable pursuant to the 2014 Stock Plan (500,000 shares) and the 2007 Stock Plan (57,500 shares).

Item 13.   CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2015 Annual Meeting of Stockholders to be filed with the SEC on or before April 30, 2015, or, if our proxy statement is not filed on or before April 30, 2015, will be filed by that date by an amendment to this Form 10-K.

Item 14.   PRINCIPAL ACCOUNTING FEES AND SERVICES

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2015 Annual Meeting of Stockholders to be filed with the SEC on or before April 30, 2015, or, if our proxy statement is not filed on or before April 30, 2015, will be filed by that date by an amendment to this Form 10-K.


PART IV

Item 15.   EXHIBITS, FINANCIAL STATEMENT SCHEDULES

(a)     The documents filed as part of this Annual Report on Form 10-K are:

(i)     Our consolidated financial statements and notes thereto as well as the applicable report of our independent registered public accounting firm are included in Part II, Item 8 of this Annual Report on Form 10-K.
(ii)    The following financial statement schedule should be read in conjunction with the consolidated financial statements set forth in Part II, Item 8 of this Annual Report on Form 10-K:
                Schedule II -- Valuation and Qualifying Accounts
(iii)   The exhibits required by Item 601 of Regulation S-K are included under Item 15(b) of this Annual Report on Form 10-K.

(b)     Exhibits required by Item 601 of Regulation S-K:

A list of the Exhibits which are required by Item 601 of Regulation S-K and filed with this Report is set forth in the Exhibit Index immediately following the signature page, which Exhibit Index is incorporated herein by reference.

- 30 -

 

Signatures

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

inTEST Corporation

 



By:   /s/ Robert E. Matthiessen
        Robert E. Matthiessen
        President and Chief Executive Officer


March 26, 2015

 

Pursuant to the requirements of Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.


/s/ Robert E. Matthiessen

Robert E. Matthiessen, President,
Chief Executive Officer and Director
(Principal Executive Officer)


March 26, 2015

 

 


/s/ Hugh T. Regan, Jr.
Hugh T. Regan, Jr., Treasurer, Chief
Financial Officer and Secretary
(Principal Financial Officer)


March 26, 2015

 

 


/s/ Alyn R. Holt
Alyn R. Holt, Executive Chairman


March 26, 2015

 

 


/s/ Steven J. Abrams
Steven J. Abrams, Esq., Director


March 26, 2015

 

 


/s/ Joseph W. Dews IV
Joseph W. Dews IV, Director


March 26, 2015

 

 


/s/ William Kraut
William Kraut, Director


March 26, 2015

 

 

 

- 31 -

 

 

 

 

Index to Exhibits

Exhibit
Number


Description of Exhibit

  3.1

Certificate of Incorporation. (1)

  3.2

Bylaws as amended on December 5, 2013. (2)

10.1

Lease Agreement between Exeter 804 East Gate, LLC and the Company dated May 10, 2010. (3)

10.2

Lease Agreement between AMB-SGP Seattle/Boston, LLC and Temptronic Corporation (a subsidiary of the Company), dated October 25, 2010. (4)

10.3

Lease Agreements between Columbia California Warm Springs Industrial, LLC and inTEST Silicon Valley Corporation dated January 9, 2012. (5)

10.4

Guaranty Agreements between Columbia California Warm Springs Industrial, LLC and inTEST Corporation dated January 9, 2012. (5)

10.5

inTEST Corporation 2014 Stock Plan (6)(*)

10.6

inTEST Corporation 2007 Stock Plan. (7)(*)

10.7

Form of Restricted Stock Grant. (8)(*)

10.8

Form of Stock Option Grant - Director. (8)(*)

10.9

Form of Stock Option Grant - Officer. (8)(*)

10.10

Change of Control Agreement dated August 27, 2007 between the Company and Robert E. Matthiessen. (9)(*)

10.11

Change of Control Agreement dated August 27, 2007 between the Company and Hugh T. Regan, Jr. (9)(*)

10.12

Change of Control Agreement dated May 5, 2008 between the Company and Daniel J. Graham. (10)(*)

10.13

Change of Control Agreement dated May 5, 2008 between the Company and James Pelrin. (10)(*)

10.14

Amendment to Change of Control Agreement dated December 31, 2008 between the Company and Robert E. Matthiessen. (11)(*)

10.15

Amendment to Change of Control Agreement dated December 31, 2008 between the Company and Hugh T. Regan, Jr. (11)(*)

10.16

Amendment to Change of Control Agreement dated December 31, 2008 between the Company and Daniel J. Graham. (11)(*)

10.17

Amendment to Change of Control Agreement dated December 31, 2008 between the Company and James Pelrin. (11)(*)

10.18

Compensatory Arrangements of Executive Officers and Directors. (*)

14

Code of Ethics. (12)

21

Subsidiaries of the Company.

23

Consent of McGladrey LLP.

31.1

Certification of Chief Executive Officer pursuant to Rule 13a-14(a).

31.2

Certification of Chief Financial Officer pursuant to Rule 13a-14(a).

32.1

Certification of Chief Executive Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

32.2

Certification of Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

 

 

- 32 -

 

 

Index to Exhibits
(Continued)

(1)

Previously filed by the Company as an exhibit to the Company's Registration Statement on Form S-1, File No. 333-26457 filed May 2, 1997, and incorporated herein by reference.

(2)

Previously filed by the Company as an exhibit to the Company's Form 8-K dated December 5, 2013, File No. 001-36117, filed December 9, 2013, and incorporated herein by reference.

(3)

Previously filed by the Company as an exhibit to the Company's Form 8-K dated May 10, 2010, File No. 000-22529, filed May 13, 2010, and incorporated herein by reference.

(4)

Previously filed by the Company as an exhibit to the Company's Form 8-K dated October 27, 2010, File No. 000-22529, filed October 29, 2010, and incorporated herein by reference.

(5)

Previously filed by the Company as an exhibit to the Company's Form 10-Q for the quarter ended March 31, 2012, File No. 000-22529, filed May 15, 2012, and incorporated herein by reference.

(6)

Previously filed as an appendix to the Company's Proxy Statement filed April 30, 2014, and incorporated herein by reference.

(7)

Previously filed as an appendix to the Company's Proxy Statement filed April 27, 2007, and incorporated herein by reference.

(8)

Previously filed by the Company as an exhibit to the Company's Form 10-K for the year ended December 31, 2004, File No. 000-22529, filed March 31, 2005, and incorporated herein by reference.

(9)

Previously filed by the Company as an exhibit to the Company's Form 10-K for the year ended December 31, 2007, File No. 000-22529, filed March 31, 2008, and incorporated herein by reference.

(10)

Previously filed by the Company as an exhibit to the Company's Form 10-Q for the quarter ended June 30, 2008, File No. 000-22529, filed August 14, 2008, and incorporated herein by reference.

(11)

Previously filed by the Company as an exhibit to the Company's Form 10-Q for the quarter ended June 30, 2009, File No. 000-22529, filed August 14, 2009, and incorporated herein by reference.

(12)

Previously filed by the Company as an exhibit to the Company's Form 10-K for the year ended December 31, 2003, File No. 000-22529, filed March 30, 2004, and incorporated herein by reference.

(*)

Indicates a management contract or compensatory plan, contract or arrangement in which a director or executive officers participate.

 

 

 

 

 

 - 33 -

 

 

 

 

 

 

 

inTEST CORPORATION

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS AND
FINANCIAL STATEMENT SCHEDULE

 

 

Page

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

F - 1

 

 

CONSOLIDATED FINANCIAL STATEMENTS

 

    Consolidated Balance Sheets as of December 31, 2014 and 2013

F - 2

    Consolidated Statements of Operations for the years ended
       December 31, 2014 and 2013


F - 3

    Consolidated Statements of Comprehensive Earnings for the years
       ended December 31, 2014 and 2013


F - 3

    Consolidated Statements of Stockholders' Equity for the years
       ended December 31, 2014 and 2013


F - 4

    Consolidated Statements of Cash Flows for the years ended
       December 31, 2014 and 2013


F - 5

    Notes to Consolidated Financial Statements

F - 6

FINANCIAL STATEMENT SCHEDULE

 

    Schedule II - Valuation and Qualifying Accounts

F - 21

 

 

 

 

 

 

- 34 -

 

 

 

 

 

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

 

To The Board of Directors and Stockholders
inTEST Corporation



We have audited the accompanying consolidated balance sheets of inTEST Corporation and subsidiaries as of December 31, 2014 and 2013, and the related consolidated statements of operations, comprehensive earnings, stockholders' equity, and cash flows for the years then ended. Our audits also included the financial statement schedule of inTEST Corporation listed in Item 15(a). These financial statements and financial statement schedule are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of inTEST Corporation and subsidiaries as of December 31, 2014 and 2013, and the results of their operations and their cash flows for the years then ended in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

 

 

/s/ McGLADREY LLP

 

 

Blue Bell, Pennsylvania
March 26, 2015

 

 

F - 1

 

 

inTEST CORPORATION
CONSOLIDATED BALANCE SHEETS
(In thousands, except share and per share data)

                                                                       December 31,
                                                                   --------------------
                                                                     2014        2013
ASSETS:                                                            ---------   --------
Current assets:
  Cash and cash equivalents                                         $23,126    $19,018
  Trade accounts receivable, net of allowance for
    doubtful accounts of $146 and $147, respectively                  5,034      5,748
  Inventories                                                         3,769      3,243
  Deferred tax assets                                                   529        701
  Prepaid expenses and other current assets                             473        371
     Total current assets                                            32,931     29,081
Property and equipment:
  Machinery and equipment                                             4,322      4,190
  Leasehold improvements                                                593        594
     Gross property and equipment                                     4,915      4,784
  Less: accumulated depreciation                                     (3,647)    (3,530)
     Net property and equipment                                       1,268      1,254

Deferred tax assets                                                     884      1,030
Goodwill                                                              1,706      1,706
Intangible assets, net                                                1,393      1,748
Restricted certificates of deposit                                      350        450
Other assets                                                            206        212
     Total assets                                                   $38,738    $35,481
                                                                    =======    =======
LIABILITIES AND STOCKHOLDERS' EQUITY
Current liabilities:
  Accounts payable                                                  $ 1,234    $ 1,064
  Accrued wages and benefits                                          1,528      1,635
  Accrued rent                                                          615        577
  Accrued professional fees                                             390        367
  Accrued sales commissions                                             328        305
  Domestic and foreign income taxes payable                              22         83
  Other current liabilities                                             253        301
     Total current liabilities                                        4,370      4,332

Commitments and Contingencies (Notes 9 and 11)

Stockholders' equity:
  Preferred stock, $0.01 par value; 5,000,000 shares authorized;
     no shares issued or outstanding                                      -          -
  Common stock, $0.01 par value; 20,000,000 shares authorized;
     10,595,755 and 10,590,755 shares issued, respectively              106        106
  Additional paid-in capital                                         26,321     26,187
  Retained earnings                                                   7,152      3,713
  Accumulated other comprehensive earnings                              993      1,347
  Treasury stock, at cost; 33,077 and 33,077 shares, respectively      (204)      (204)
     Total stockholders' equity                                      34,368     31,149

     Total liabilities and stockholders' equity                     $38,738    $35,481
                                                                    =======    =======

See accompanying Notes to Consolidated Financial Statements.

F - 2

 

inTEST CORPORATION
CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except share and per share data)

                                                          Years Ended December 31,
                                                          ------------------------
                                                            2014             2013
                                                          -------          -------
Net revenues                                              $41,796          $39,426
Cost of revenues                                           21,334           20,411
      Gross margin                                         20,462           19,015

Operating expenses:
   Selling expense                                          5,735            5,395
   Engineering and product development expense              3,580            3,683
   General and administrative expense                       6,231            5,975
      Total operating expenses                             15,546           15,053

Operating income                                            4,916            3,962
Other income (expense)                                         (7)              46

Earnings before income tax expense                          4,909            4,008
Income tax expense                                          1,470              931

      Net earnings                                        $ 3,439          $ 3,077
                                                          =======          =======
Net earnings per common share:
  Basic                                                    $0.33            $0.30
  Diluted                                                  $0.33            $0.30
Weighted average common shares outstanding:
  Basic                                                 10,431,743       10,363,678
  Diluted                                               10,466,064       10,419,103


See accompanying Notes to Consolidated Financial Statements.

 

inTEST CORPORATION
CONSOLIDATED STATEMENTS OF COMPREHENSIVE EARNINGS
(In thousands)

                                                          Years Ended December 31,
                                                          ------------------------
                                                            2014             2013
                                                          -------          -------
Net earnings                                              $ 3,439          $ 3,077

Foreign currency translation adjustments                     (354)              94

Comprehensive earnings                                    $ 3,085          $ 3,171
                                                          =======          =======


See accompanying Notes to Consolidated Financial Statements.

F - 3

 

 

inTEST CORPORATION
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
(In thousands, except share data)

 

 

 

                                                                           Accumulated
                                  Common Stock   Additional                   Other                  Total
                               -----------------  Paid-In     Retained    Comprehensive  Treasury Stockholders'
                                 Shares   Amount  Capital     Earnings       Earnings     Stock      Equity
                               ---------- ------ ---------- ------------  -------------  -------- -------------
Balance, January 1, 2013       10,453,255  $ 105   $26,030    $    636       $1,253      $  (204)     $27,820

Net earnings                            -      -         -       3,077            -            -        3,077
Other comprehensive earnings            -      -         -           -           94            -           94
Amortization of deferred
  compensation related to
  restricted stock                      -      -       128           -            -            -          128
Issuance of non-vested
  shares of restricted stock      127,500      1        (1)          -            -            -            -
Stock options exercised            10,000      -        30           -            -            -           30
                               ----------  -----   -------    --------       ------      -------      -------

Balance, December 31, 2013     10,590,755    106    26,187       3,713        1,347         (204)      31,149

Net earnings                            -      -         -       3,439            -            -        3,439
Other comprehensive loss                -      -         -           -         (354)           -         (354)
Amortization of deferred
  compensation related to
  restricted stock                      -      -       134           -            -            -          134
Forfeiture of non-vested
  shares of restricted stock       (5,000)     -         -           -            -            -            -
Issuance of non-vested
  shares of restricted stock       10,000      -         -           -            -            -            -
                               ----------  -----   -------    --------       ------      -------      -------

Balance, December 31, 2014     10,595,755  $ 106   $26,321    $  7,152       $  993      $  (204)     $34,368

                               ==========  =====   =======    ========       ======      =======      =======

 

 

 

 

 

See accompanying Notes to Consolidated Financial Statements.

F - 4

 

 

 

 

 

inTEST CORPORATION
CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)



                                                                          Years Ended December 31,
                                                                          ------------------------
                                                                            2014             2013
                                                                          -------          -------
CASH FLOWS FROM OPERATING ACTIVITIES
  Net earnings                                                            $ 3,439          $ 3,077
  Adjustments to reconcile net earnings to net cash provided by
   operating activities:
    Depreciation and amortization                                             879              847
    Provision for excess and obsolete inventory                               344              311
    Foreign exchange loss                                                      44                4
    Amortization of deferred compensation related to restricted stock         134              128
    (Gain) loss on sale of property and equipment                              44               (3)
    Proceeds from sale of demonstration equipment, net of gain                161               32
    Deferred income tax expense                                               318              307
    Changes in assets and liabilities:
      Trade accounts receivable                                               610             (233)
      Inventories                                                            (893)            (416)
      Prepaid expenses and other current assets                              (113)              (6)
      Restricted certificates of deposit                                      100                -
      Other assets                                                            (17)             (18)
      Accounts payable                                                        172               23
      Accrued wages and benefits                                              (75)              63
      Accrued rent                                                             38               48
      Accrued professional fees                                                25              (19)
      Accrued sales commissions                                                23              (43)
      Domestic and foreign income taxes payable                               (61)               -
      Other current liabilities                                               (43)            (332)
                                                                          -------          -------
Net cash provided by operating activities                                   5,129            3,770
                                                                          -------          -------

CASH FLOWS FROM INVESTING ACTIVITIES
  Purchase of property and equipment                                         (831)            (424)
  Proceeds from sale of property and equipment                                  8               10
                                                                          -------          -------
Net cash used in investing activities                                        (823)            (414)
                                                                          -------          -------

CASH FLOWS FROM FINANCING ACTIVITIES
  Proceeds from stock options exercised                                         -               30
                                                                          -------          -------
Net cash provided by financing activities                                       -               30
                                                                          -------          -------
Effects of exchange rates on cash                                            (198)              56
                                                                          -------          -------
Net cash provided by all activities                                         4,108            3,442
Cash and cash equivalents at beginning of period                           19,018           15,576
                                                                          -------          -------
Cash and cash equivalents at end of period                                $23,126          $19,018
                                                                          =======          =======
Cash payments for:
  Domestic and foreign income taxes                                       $ 1,213          $   623


SUPPLEMENTAL DISCLOSURE OF NON-CASH INVESTING AND FINANCING ACTIVITIES:
Issuance of non-vested shares of restricted stock                         $    41          $   462
Forfeiture of non-vested shares of restricted stock                       $   (20)         $     -

 

 

See accompanying Notes to Consolidated Financial Statements.

F - 5

 

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)

(1)   NATURE OF OPERATIONS

We are an independent designer, manufacturer and marketer of thermal, mechanical and electrical products that are primarily used by semiconductor manufacturers in conjunction with automatic test equipment ("ATE") in the testing of integrated circuits ("ICs" or "semiconductors"). In addition, in recent years we have begun marketing our thermal products in markets outside the ATE market, such as the automotive, consumer electronics, defense/aerospace, energy, industrial and telecommunications markets.

The consolidated entity is comprised of inTEST Corporation (parent) and our wholly-owned subsidiaries. We have three reportable segments which are also our reporting units: Thermal Products, Mechanical Products and Electrical Products. We manufacture our products in the U.S. Marketing and support activities are conducted worldwide from our facilities in the U.S., Germany and Singapore.

The semiconductor market in which we operate is characterized by rapid technological change, competitive pricing pressures and cyclical as well as seasonal market patterns. This market is subject to significant economic downturns at various times. Our financial results are affected by a wide variety of factors, including, but not limited to, general economic conditions worldwide and in the markets in which we operate, economic conditions specific to the semiconductor market and the other markets we serve, our ability to safeguard patented technology and intellectual property in a rapidly evolving market, downward pricing pressures from customers, and our reliance on a relatively few number of customers for a significant portion of our sales. In addition, we are exposed to the risk of obsolescence of our inventory depending on the mix of future business and technological changes within the markets that we serve. As a result of these or other factors, we may experience significant period-to-period fluctuations in future operating results.

(2)   SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Basis of Presentation and Use of Estimates

The accompanying consolidated financial statements include our accounts and those of our wholly-owned subsidiaries. All significant intercompany accounts and transactions have been eliminated upon consolidation. The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America ("U.S. GAAP") requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. Certain of our accounts, including inventories, long-lived assets, goodwill, identifiable intangibles and deferred tax assets and liabilities including related valuation allowances, are particularly impacted by estimates.

Reclassification

Certain prior year amounts have been reclassified to be comparable with the current year's presentation.

Cash and Cash Equivalents

Short-term investments that have maturities of three months or less when purchased are considered to be cash equivalents and are carried at cost, which approximates market value. Our cash balances, which are deposited with highly reputable financial institutions, at times may exceed the federally insured limits. We have not experienced any losses related to these cash balances and believe the credit risk to be minimal.

Trade Accounts Receivable and Allowance for Doubtful Accounts

Trade accounts receivable are recorded at the invoiced amount and do not bear interest. We grant credit to customers and generally require no collateral. To minimize our risk, we perform ongoing credit evaluations of our customers' financial condition. The allowance for doubtful accounts is our best estimate of the amount of probable credit losses in our existing accounts receivable. We determine the allowance based on historical write-off experience and the aging of such receivables, among other factors. Account balances are charged off against the allowance after all means of collection have been exhausted and the potential for recovery is considered remote. We do not have any off-balance sheet credit exposure related to our customers. There was no bad debt expense recorded in either of the years ended December 31, 2014 or 2013. Cash flows from accounts receivable are recorded in operating cash flows.

F - 6

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)

(2)   SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)

Fair Value of Financial Instruments

Our financial instruments, principally accounts receivable and accounts payable, are carried at cost which approximates fair value, due to the short maturities of the accounts.

Inventories

Inventories are valued at cost on a first-in, first-out basis, not in excess of market value. Cash flows from the sale of inventories are recorded in operating cash flows. On a quarterly basis, we review our inventories and record excess and obsolete inventory charges based upon our established objective excess and obsolete inventory criteria. These criteria identify material that has not been used in a work order during the prior twelve months and the quantity of material on hand that is greater than the average annual usage of that material over the prior three years. In certain cases, additional excess and obsolete inventory charges are recorded based upon current market conditions, anticipated product life cycles, new product introductions and expected future use of the inventory. The excess and obsolete inventory charges we record establish a new cost basis for the related inventories. We incurred excess and obsolete inventory charges of $344 and $311 for the years ended December 31, 2014 and 2013, respectively.

Property and Equipment

Machinery and equipment are stated at cost. As further discussed below under "Goodwill, Intangible and Long-Lived Assets," machinery and equipment that has been determined to be impaired is written down to its fair value at the time of the impairment. Depreciation is based upon the estimated useful life of the assets using the straight-line method. The estimated useful lives range from one to ten years. Leasehold improvements are recorded at cost and amortized over the shorter of the lease term or the estimated useful life of the asset. Total depreciation expense was $524 and $401 for the years ended December 31, 2014 and 2013, respectively.

Goodwill, Intangible and Long-Lived Assets

We account for goodwill and intangible assets in accordance with Accounting Standards Codification ("ASC") 350 (Intangibles- Goodwill and Other). Finite-lived intangible assets are amortized over their estimated useful economic life and are carried at cost less accumulated amortization. Goodwill is assessed for impairment at least annually in the fourth quarter, on a reporting unit basis, or more frequently when events and circumstances occur indicating that the recorded goodwill may be impaired. As a part of the goodwill impairment assessment, we have the option to perform a qualitative assessment to determine whether it is more-likely-than-not that the fair value of a reporting unit is less than its carrying amount. If we determine this is the case, we are required to perform a two-step goodwill impairment test to identify potential goodwill impairment and measure the amount of goodwill impairment loss to be recognized. The two-step test is discussed below. If we determine that it is more-likely-than-not that the fair value of the reporting unit is greater than its carrying amounts, the two-step goodwill impairment test is not required.

If we determine it is more-likely-than-not that the fair value of a reporting unit is less than its carrying amount as a result of our qualitative assessment, we will perform a quantitative two-step goodwill impairment test. In the Step I test, the fair value of a reporting unit is computed and compared with its book value. If the book value of a reporting unit exceeds its fair value, a Step II test is performed in which the implied fair value of goodwill is compared with the carrying amount of goodwill. If the carrying amount of goodwill exceeds the implied fair value, an impairment loss is recorded in an amount equal to that excess. The two-step goodwill impairment assessment is based upon a combination of the income approach, which estimates the fair value of our reporting units based upon a discounted cash flow approach, and the market approach which estimates the fair value of our reporting units based upon comparable market multiples. This fair value is then reconciled to our market capitalization at year end with an appropriate control premium. The determination of the fair value of our reporting units requires management to make significant estimates and assumptions including the selection of appropriate peer group companies, control premiums, discount rate, terminal growth rates, forecasts of revenue and expense growth rates, changes in working capital, depreciation, amortization and capital expenditures. Changes in assumptions concerning future financial results or other underlying assumptions could have a significant impact on either the fair value of the reporting unit or the amount of the goodwill impairment charge.

F - 7

 

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)


(2)   SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)

Indefinite-lived intangible assets are assessed for impairment at least annually in the fourth quarter, or more frequently if events or changes in circumstances indicate that the asset might be impaired. As a part of the impairment assessment, we have the option to perform a qualitative assessment to determine whether it is more likely than not that an indefinite-lived intangible asset is impaired. If, as a result of our qualitative assessment, we determine that it is more-likely-than-not that the fair value of the indefinite-lived intangible asset is less than its carrying amount, the quantitative impairment test is required. Otherwise, no further testing is required. The quantitative impairment test consists of a comparison of the fair value of the intangible asset with its carrying amount. If the carrying amount of the intangible asset exceeds its fair value, an impairment loss is recognized in an amount equal to that excess.

Long-lived assets, which consist of finite-lived intangible assets and property and equipment, are assessed for impairment whenever events or changes in business circumstances indicate that the carrying amount of the assets may not be fully recoverable or that the useful lives of these assets are no longer appropriate. Each impairment test is based on a comparison of the estimated undiscounted cash flows to the recorded value of the asset. If impairment is indicated, the asset is written down to its estimated fair value. The cash flow estimates used to determine the impairment, if any, contain management's best estimates using appropriate assumptions and projections at that time.

Stock-Based Compensation

We account for stock-based compensation in accordance with ASC Topic 718 (Compensation - Stock Compensation) which requires that employee share-based equity awards be accounted for under the fair value method and requires the use of an option pricing model for estimating fair value, which is then amortized to expense over the service periods. See further disclosures related to our stock-based compensation plan in Note 12.

Subsequent Events

We have made an assessment of our operations and determined that there were no material subsequent events requiring adjustment to, or disclosure in, our consolidated financial statements for the year ended December 31, 2014.

Revenue Recognition


We recognize revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the price is fixed or determinable, and collection of the related receivable is reasonably assured. Sales of our products are made through our sales employees, third-party sales representatives and distributors. There are no differences in revenue recognition policies based on the sales channel. We do not provide our customers with rights of return or exchanges. Revenue is generally recognized upon product shipment. Our customers' purchase orders do not typically contain any customer-specific acceptance criteria, other than that the product performs within the agreed upon specifications. We test all products manufactured as part of our quality assurance process to determine that they comply with specifications prior to shipment to a customer. To the extent that any customer purchase order contains customer-specific acceptance criteria, revenue recognition is deferred until customer acceptance.

In addition, in our Thermal Products and Mechanical Products segments, we lease certain of our equipment to customers under non-cancellable operating leases. These leases generally have an initial term of six months. We recognize revenue for these leases on a straight-line basis over the term of the lease.

With respect to sales tax collected from customers and remitted to governmental authorities, we use a net presentation in our consolidated statement of operations. As a result, there are no amounts included in either our net revenues or cost of revenues related to sales tax.

Product Warranties

We generally provide product warranties and record estimated warranty expense at the time of sale based upon historical claims experience. Warranty expense is included in selling expense in the consolidated financial statements.

F - 8


inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)

(2)   SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)

Engineering and Product Development

Engineering and product development costs, which consist primarily of the salary and related benefits costs of our technical staff, as well as the cost of materials used in product development, are expensed as incurred.

Foreign Currency

For our foreign subsidiary whose functional currency is not the U.S. dollar, assets and liabilities are translated using the exchange rate in effect at the balance sheet date. The results of operations are translated using an average exchange rate for the period. The effects of rate fluctuations in translating assets and liabilities of these international operations into U.S. dollars are included in accumulated other comprehensive earnings in stockholders' equity. Transaction gains or losses are included in net earnings. For the years ended December 31, 2014 and 2013, foreign currency transaction losses were $44 and $4, respectively.

Income Taxes

The asset and liability method is used in accounting for income taxes. Under this method, deferred tax assets and liabilities are recognized for operating loss and tax credit carryforwards and for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in the results of operations in the period that includes the enactment date. A valuation allowance is recorded to reduce the carrying amounts of deferred tax assets if it is more likely than not that such assets will not be realized.

Net Earnings Per Common Share

Net earnings per common share - basic is computed by dividing net earnings by the weighted average number of common shares outstanding during each period. Net earnings per common share - diluted is computed by dividing net earnings by the weighted average number of common shares and common share equivalents outstanding during each period. Common share equivalents represent stock options and unvested shares of restricted stock and are calculated using the treasury stock method. Common share equivalents are excluded from the calculation if their effect is anti-dilutive.

The table below sets forth, for the periods indicated, a reconciliation of weighted average common shares outstanding - basic to weighted average common shares and common share equivalents outstanding - diluted and the average number of potentially dilutive securities and their respective weighted average exercise prices that were excluded from the calculation of diluted earnings per share because their effect was anti-dilutive:

 

Years Ended December 31,

 

2014

2013

 

 

 

Weighted average common shares outstanding - basic

10,431,743

10,363,678

Potentially dilutive securities:

 

 

     Employee stock options and unvested shares of restricted stock

       34,321

       55,425

Weighted average common shares outstanding - diluted

10,466,064

10,419,103

Average number of potentially dilutive securities
  excluded from calculation


48,021


32,836

Effect of Recently Issued Amendments to Authoritative Accounting Guidance

In May 2014, the FASB issued new guidance on the recognition of revenue from contracts with customers. This guidance is presented in ASC Topic 606 (Revenue from Contracts with Customers). This new guidance will replace most existing revenue recognition guidance in U.S. GAAP when it becomes effective. Companies can use either the retrospective or cumulative effect transition method. This new guidance is effective for us on January 1, 2017. Early application is not permitted. We have not yet selected a transition method and we are still evaluating the effect that this guidance will have on our consolidated financial statements and related disclosures.

F - 9

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)


(3)   GOODWILL, INTANGIBLE AND LONG-LIVED ASSETS

Goodwill and intangible assets on our balance sheets are the result of our acquisitions of Sigma Systems Corp. ("Sigma") in October 2008 and Thermonics, Inc. ("Thermonics") in January 2012.

Goodwill

All of our goodwill is allocated to our Thermal Products segment. There were no changes in the amount of the carrying value of goodwill for the year ended December 31, 2014.

Intangible Assets

The following table provides further detail about our intangible assets as of December 31, 2014 and 2013:

 

      December 31, 2014       

 

Gross
Carrying
Amount


Accumulated Amortization

Net
Carrying
Amount

Finite-lived intangible assets:

 

 

 

   Customer relationships

$1,480

$   979   

$   501

   Patented technology

590

346   

244

   Software

270

169   

101

   Trade name

140

103   

37

   Customer backlog

70

70   

-

   Non-compete/non-solicitation agreement

      48

      48   

         -

Total finite-lived intangible assets

 2,598

 1,715   

    883

Indefinite-lived intangible assets:

 

 

 

   Sigma trademark

    510

         -   

    510

Total intangible assets

$3,108

$1,715   

$1,393

 

 

 

 

 

      December 31, 2013       

 

Gross
Carrying
Amount


Accumulated Amortization

Net
Carrying
Amount

Finite-lived intangible assets:

 

 

 

   Customer relationships

$1,480

$   725   

$   755

   Patented technology

590

307   

283

   Software

270

142   

128

   Trade name

140

68   

72

   Customer backlog

70

70   

-

   Non-compete/non-solicitation agreement

      48

      48   

         -

Total finite-lived intangible assets

 2,598

 1,360   

 1,238

Indefinite-lived intangible assets:

 

 

 

   Sigma trademark

    510

         -   

    510

Total intangible assets

$3,108

$1,360   

$1,748

We generally amortize our finite-lived intangible assets over their estimated useful lives on a straight-line basis, unless an alternate amortization method can be reliably determined. Any such alternate amortization method would be based on the pattern in which the economic benefits of the intangible asset are expected to be consumed. None of our finite-lived assets have any residual value. The following table provides further information about the estimated useful lives of our finite-lived intangible assets as of December 31, 2014:

F - 10

 

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)


(3)   GOODWILL, INTANGIBLE AND LONG-LIVED ASSETS (Continued)

 



Estimated
Useful Life

Remaining
Estimated
Useful Life at
Dec. 31, 2014

 

- - - - (in months) - - - -

Finite-lived intangible assets resulting from the acquisition of Sigma:

 

 

   Customer relationships

72    

-      

   Software

120    

45      

   Patented technology

60    

-      

Finite-lived intangible assets resulting from the acquisition of Thermonics:

 

 

   Customer relationships

72    

36.5      

   Customer backlog

3    

-      

   Trade name

48    

12.5      

   Patented technology

132    

96.5      

   Non-compete/non-solicitation agreement

18    

-      

The following table sets forth changes in the amount of the carrying value of finite-lived intangible assets for the year ended December 31, 2014:

Balance - January 1, 2014

$1,238 

Amortization

   (355)

Balance - December 31, 2014

$   883 

Total amortization expense for the years ended December 31, 2014 and 2013 was $355 and $446, respectively. The following table sets forth the estimated annual amortization expense for our finite-lived intangible assets for each of the next five years:

2015

$289

2016

$229

2017

$212

2018

$  65

2019

$  39

Impairment of Goodwill and Indefinite Life Intangible Assets

During December 2014 and 2013, we assessed our goodwill and indefinite life intangible asset for impairment in accordance with the requirements of ASC Topic 350 (Intangibles - Goodwill and Other). Our goodwill impairment assessment is based upon a combination of the income approach, which estimates the fair value of our reporting units based upon a discounted cash flow approach, and the market approach which estimates the fair value of our reporting units based upon comparable market multiples. This fair value is then reconciled to our market capitalization at year end with an appropriate control premium. The discount rates used in 2014 and 2013 for the discounted cash flows were 17% and 20%, respectively. The selection of these rates was based upon our analysis of market based estimates of capital costs and discount rates. The peer companies used in the market approach operate in our market segment. The determination of the fair value of our reporting units requires management to make significant estimates and assumptions including the selection of appropriate peer group companies, control premiums, discount rate, terminal growth rates, forecasts of revenue and expense growth rates, changes in working capital, depreciation, amortization and capital expenditures. Changes in assumptions concerning future financial results or other underlying assumptions could have a significant impact on either the fair value of the reporting unit or the amount of the goodwill impairment charge.

 

F - 11

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)


(3)   GOODWILL, INTANGIBLE AND LONG-LIVED ASSETS (Continued)

During the goodwill impairment assessment in both 2014 and 2013, we performed a Step I test to identify potential impairment, in which the fair value of the reporting unit was compared with its book value. This assessment indicated no impairment existed as the fair value of this reporting unit was determined to exceed its carrying value by 68% or $15,971 at December 31, 2014 and by 65% or $13,888 at December 31, 2013.

During the indefinite life intangible asset impairment assessment in both 2014 and 2013, we compared the fair value of our intangible asset with its carrying amount. This assessment indicated no impairment existed as the fair value of the intangible assets exceeded their carrying values in both 2014 and 2013.

Impairment of Long-Lived Assets and Finite-lived Intangible Assets

As previously noted, our long-lived assets consist of our finite-lived intangible assets and property and equipment. During both December 2014 and 2013, due to continued operating losses experienced in our Mechanical Products segment, we assessed the long-lived assets of this segment for impairment. Our assessments indicated that the property and equipment that is allocated to this segment was not impaired. During 2014 and 2013, we did not review our Thermal and Electrical Products segment's long lived assets for impairment as there were no events or changes in business circumstances that would indicate an impairment might exist.


(4)   MAJOR CUSTOMERS

Texas Instruments Incorporated accounted for 13% of our consolidated net revenues in both 2014 and 2013. While all three of our operating segments sold products to this customer, these revenues were primarily generated by our Mechanical Products and Electrical Products segments. Hakuto Co. Ltd. accounted for 11% of our consolidated net revenues in 2014. These revenues were generated by our Thermal Products segment. During the years ended December 31, 2014 and 2013, no other customer accounted for 10% or more of our consolidated net revenues.


(5)   INVENTORIES

Inventories held at December 31 were comprised of the following:

 

2014

2013

Raw materials

$2,505

$2,753

Work in process

406

222

Inventory consigned to others

129

94

Finished goods

    729

    174

 

$3,769

$3,243

(6)  OTHER CURRENT LIABILITIES

Other current liabilities at December 31 were comprised of the following:

 

2014  

2013  

Accrued warranty

$118

$123

Deferred revenue and customer deposits

70

74

Other

    65

  104

 

$253

$301

 

F - 12


inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)


(7)   DEBT

Letters of Credit

We have issued letters of credit as the security deposits for certain of our domestic leases. These letters of credit are secured by pledged certificates of deposit which are classified as Restricted Certificates of Deposit on our balance sheets. The terms of our leases require us to renew these letters of credit at least 30 days prior to their expiration dates for successive terms of not less than one year until lease expiration. The terms of our leases also allow us to request a reduction in the amount of these letters of credit at certain points during the lease term if there have been no events of default. As of December 31, 2014, there have been no events of default. Our outstanding letters of credit at December 31, 2014 and 2013 consisted of the following:

 

 

L/C

Lease

Letters of Credit
Amount Outstanding

Facility

Original L/C
Issue Date

Expiration
    Date    

Expiration
    Date    

Dec. 31
  2014  

Dec. 31,
  2013  

Mt. Laurel, NJ

3/29/2010

3/31/2015

4/30/2021

$250   

$250   

Mansfield, MA

10/27/2010

11/08/2015

8/23/2021

 100   

 200   

 

 

 

 

$350   

$450   


(8)   EQUIPMENT LEASING

In our Thermal Products and Mechanical Products segments, we lease certain of our equipment to customers under non-cancellable operating leases. These leases generally have an initial term of six months. We recognize revenue for these leases on a straight-line basis over the term of the lease.

The total cost of leased equipment at December 31, 2014 and 2013 was $692 and $561, respectively, and is included in Machinery and Equipment on our balance sheet. As of December 31, 2014 and 2013, accumulated depreciation for leased equipment was $167 and $138, respectively.

As of December 31, 2014, total minimum payments receivable under non-cancellable operating leases were $151. All of these payments will be received in 2015.


(9)   COMMITMENTS AND CONTINGENCIES

Operating Lease Commitments

We lease our offices, warehouse facilities, automobiles and certain equipment under non-cancellable operating leases which expire at various dates through 2021. Total rental expense for the years ended December 31, 2014 and 2013 was $1,307 and $1,221, respectively. Certain of our operating leases contain predetermined fixed escalations of minimum rentals and rent holidays during the original lease terms. Rent holidays are periods during which we have control of the leased facility but are not obligated to pay rent. For these leases, we recognize the related rental expense on a straight-line basis over the life of the lease, which includes any rent holiday, and record the difference between the amounts charged to operations and amounts paid as Accrued Rent on our balance sheet. In addition to the monthly rental payments due, most of our leases for our offices and warehouse facilities require us to pay our portion of the common area maintenance, property taxes and insurance charges incurred by the landlord for the facilities which we occupy. These amounts are generally included in rental expense in our statement of operations, but they are not included in the minimum rental commitments disclosed below as they are based on actual charges incurred in the periods to which they apply.

 

F - 13

 

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)


(9)
  COMMITMENTS AND CONTINGENCIES (Continued)

The aggregate minimum rental commitments under the non-cancellable operating leases in effect at December 31, 2014 are as follows:

2015

$1,045

2016

1,097

2017

1,062

2018

981

2019

999

Thereafter

  1,504

 

$6,688


(10)  INCOME TAXES

We are subject to Federal and certain state income taxes. In addition, we are taxed in certain foreign countries. As of December 31, 2014 and 2013, there were no cumulative undistributed earnings of our foreign subsidiaries for which U.S. income taxes have not been provided.

Earnings before income taxes was as follows:

 

Years Ended
December 31,

 

2014

2013

Domestic

$4,061 

$3,245 

Foreign

    848 

    763 

 

 

 

 

$4,909 

$4,008 

Income tax expense (benefit) was as follows:

 

Years Ended
December 31,

 

2014

2013

Current

 

 

    Domestic -- Federal

$ 1,073 

$  515 

    Domestic -- state

78 

74 

    Foreign

       1 

    35 

 

$ 1,152 

$  624 

Deferred

 

 

    Domestic -- Federal

401 

218 

    Domestic -- state

256 

212 

    Foreign

   (339)

  (123)

 

    318 

   307 

Income tax expense

$ 1,470 

$  931 

Deferred income taxes reflect the net tax effect of net operating loss and credit carryforwards as well as temporary differences between the carrying amount of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. The following is a summary of the significant components of our deferred tax assets and liabilities as of December 31, 2014 and 2013: 


F - 14

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)

(10)  INCOME TAXES (Continued)

 

December 31,

Deferred tax assets:

2014

2013

    Depreciation of property and equipment

$   596 

$   646 

    Net operating loss ("NOL") (state and foreign)

513 

829 

    Intangibles

224 

162 

    Inventories

184 

180 

    Accrued vacation pay and stock-based compensation

126 

169 

    Tax credit carryforwards (foreign, research and AMT)

92 

269 

    Allowance for doubtful accounts

56 

56 

    Acquisition costs

34 

37 

    Accrued warranty

11 

    Other

     21 

     26 

 

1,852 

2,385 

Valuation allowance

   (100)

   (287)

Deferred tax assets

  1,752 

  2,098 

Deferred tax liabilities:

 

 

    Net intangible assets

(232)

(260)

    Unremitted earnings of foreign subsidiaries

   (107)

   (107)

Deferred tax liabilities

   (339)

   (367)

Net deferred tax asset

$ 1,413 

$ 1,731 

The valuation allowance for deferred tax assets as of the beginning of 2014 and 2013 was $287 and $573, respectively. The net change in the valuation allowance for the years ended December 31, 2014 and 2013 were decreases of $187 and $286, respectively. In assessing the ability to realize the deferred tax assets, we consider whether it is more likely than not that some portion or all of the deferred tax assets will not be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income during periods in which those temporary differences become deductible. We consider the scheduled reversal of deferred tax liabilities, projected future taxable income and tax planning strategies in making this assessment. In order to fully realize the total deferred tax assets, we will need to generate future taxable income prior to the expiration of net operating loss and credit carryforwards which expire in various years through 2034.

An analysis of the effective tax rate for the years ended December 31, 2014 and 2013 and a reconciliation from the expected statutory rate of 34% is as follows:

 

 

Years Ended
December 31,

 

 

2014

2013

Expected income tax provision at U.S. statutory rate

$1,669 

$1,363 

Increase (decrease) in tax from:

 

 

 

Changes in valuation allowance

(187)

(286)

 

Current year tax credits (foreign and research)

(179)

(417)

 

Foreign income tax rate differences

(63)

(80)

 

Deemed dividend from foreign subsidiaries

208 

135 

 

NOL carryforwards utilized

93 

200 

 

Domestic tax expense, net of Federal benefit

52 

127 

 

Nondeductible expenses

10 

 

Other

   (130)

   (121)

Income tax expense

$1,470 

$   931 


F - 15

 

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)


(10)  INCOME TAXES (Continued)

In accounting for income taxes, we follow the guidance in ASC Topic 740 (Income Taxes) regarding the recognition and measurement of uncertain tax positions in our financial statements. Recognition involves a determination of whether it is more likely than not that a tax position will be sustained upon examination with the presumption that the tax position will be examined by the appropriate taxing authority having full knowledge of all relevant information. Our policy is to record interest and penalties associated with unrecognized tax benefits as additional income taxes in the statement of operations. As of December 31, 2014 and 2013, we did not have an accrual for uncertain tax positions.

We file U.S. income tax returns and multiple state and foreign income tax returns. With few exceptions, the U.S. and state income tax returns filed for the tax years ending on December 31, 2011 and thereafter are subject to examination by the relevant taxing authorities.


(11)  LEGAL PROCEEDINGS

From time to time we may be a party to legal proceedings occurring in the ordinary course of business. We are not currently involved in any legal proceedings the resolution of which we believe could have a material effect on our business, financial position, results of operations or long-term liquidity.


(12)  STOCK-BASED COMPENSATION PLAN

As of December 31, 2014, we have unvested restricted stock awards granted under the inTEST Corporation 2007 Stock Plan (the "2007 Stock Plan"). The 2007 Stock Plan was approved at our annual meeting of stockholders held on June 13, 2007. The 2007 Stock Plan permits the granting of stock options or restricted stock, for up to 500,000 shares of our common stock, to officers, other key employees and consultants. As of December 31, 2014, 57,500 shares remain available to grant under the 2007 Stock Plan.

In addition, at our annual meeting on June 25, 2014, our stockholders approved the inTEST Corporation 2014 Stock Plan (the "2014 Stock Plan"). The 2014 Stock Plan permits the granting of stock options, restricted stock, stock appreciation rights or restricted stock units for up to 500,000 shares of our common stock to directors, officers, other key employees and consultants. As of December 31, 2014, no stock awards have been granted under the 2014 Stock Plan.

We have not granted any stock options during 2014 or 2013. Our unvested restricted stock awards outstanding are accounted for based on their grant date fair value. As of December 31, 2014, total compensation expense to be recognized in future periods was $326. All of this expense is related to nonvested shares of restricted stock. The weighted average period over which this expense is expected to be recognized is 2.7 years.

Stock Options

The following table summarizes the stock option activity for the two years ended December 31, 2014:

 


Number
of Shares

Weighted
Average
Exercise Price

Options outstanding, January 1, 2013 (219,000 exercisable)

219,000 

$3.17    

   Granted

-    

   Exercised

(10,000)

3.04    

   Canceled

(199,000)

3.05    

Options outstanding, December 31, 2013 (10,000 exercisable)

10,000 

5.66    

   Granted

-    

   Exercised

-    

   Canceled

(10,000)

5.66    

Options outstanding, December 31, 2014

           - 

-    

F - 16

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)

(12)  STOCK-BASED COMPENSATION PLAN (Continued)

Restricted Stock Awards
We record compensation expense for restricted stock awards (nonvested shares) based on the quoted market price of our stock at the grant date and amortize the expense over the vesting period. Restricted stock awards generally vest over four years. The following table summarizes the compensation expense we recorded during 2014 and 2013, related to nonvested shares:

 

Years Ended
December 31,

 

2014

2013

Cost of revenues

$   11 

$     8 

Selling expense

10 

Engineering and product development expense

16 

28 

General and administrative expense

  101 

    82 

 

$134 

$128 

There was no compensation expense capitalized in 2014 or 2013. The following table summarizes the activity related to nonvested shares for the two years ended December 31, 2014:

 



Number
of Shares

Weighted Average
Grant Date
Fair Value

Nonvested shares outstanding, January 1, 2013

108,750 

$1.63    

   Granted

127,500 

3.62    

   Vested

(56,250)

1.70    

   Forfeited

           - 

-    

Nonvested shares outstanding, December 31, 2013

180,000 

2.69    

   Granted

10,000 

4.14    

   Vested

(83,125)

2.31    

   Forfeited

   (5,000)

3.97    

Nonvested shares outstanding, December 31, 2014

101,875 

2.82    

The total fair value of the shares that vested during the years ended December 31, 2014 and 2013 was $351 and $176, respectively, as of the vesting dates of these shares.

(13)  EMPLOYEE BENEFIT PLANS

We have a defined contribution 401(k) plan for our employees who work in the U.S. (the "inTEST 401(k) Plan"). All permanent employees of inTEST Corporation, Temptronic Corporation and inTEST Silicon Valley Corporation who are at least 18 years of age are eligible to participate in the plan. We match employee contributions dollar for dollar up to 10% of the employee's annual compensation, with a maximum limit of $5. Employer contributions vest ratably over four years. Matching contributions are discretionary. For the years ended December 31, 2014 and 2013, we recorded $317 and $320 of expense for matching contributions, respectively.

(14)  SEGMENT INFORMATION

We have three reportable segments, which are also our reporting units: Thermal Products, Mechanical Products and Electrical Products.

The Thermal Products segment includes the operations of Temptronic Corporation, Thermonics, Sigma, inTEST Thermal Solutions GmbH (Germany), and inTEST Pte, Limited (Singapore). Sales of this segment consist primarily of temperature management systems which we design, manufacture and market under our Temptronic, Thermonics and Sigma product lines. In addition, this segment provides post warranty service and support.

F - 17

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)


(14)  SEGMENT INFORMATION (Continued)

The Mechanical Products segment includes the operations of our Mt. Laurel, New Jersey manufacturing facility. Sales of our Mechanical Products segment consist primarily of manipulator and docking hardware products, which we design, manufacture and market. In addition, this segment provides post warranty service and support for various ATE equipment.

The Electrical Products segment includes the operations of inTEST Silicon Valley Corporation. Sales of this segment consist primarily of tester interface products which we design, manufacture and market.

We operate our business worldwide, and all three segments sell their products both domestically and internationally. All three segments sell to semiconductor manufacturers, third-party test and assembly houses and ATE manufacturers. Our Thermal Products segment also sells into a variety of markets outside of the ATE market, including the automotive, consumer electronics, defense/aerospace, energy, industrial and telecommunications markets. Intercompany pricing between segments is either a multiple of cost for component parts or list price for finished goods.

 

Years Ended
December 31,

 

2014

2013

Net revenues from unaffiliated customers:

 

 

Thermal Products

$23,446 

$22,962 

Mechanical Products

11,245 

9,962 

Electrical Products

   7,105 

   6,502 

 

$41,796 

$39,426 

Depreciation/amortization:

 

 

Thermal Products

$720 

$695 

Mechanical Products

87 

79 

Electrical Products

   72 

   73 

 

$879 

$847 

Operating income (loss):

 

 

Thermal Products

$4,740 

$4,322 

Mechanical Products

(18)

(784)

Electrical Products

781 

722 

Corporate

   (587)

   (298)

 

$4,916 

$3,962 

Earnings (loss) before income tax expense (benefit):

 

 

Thermal Products

$4,699 

$4,327 

Mechanical Products

(5)

(772)

Electrical Products

802 

751 

Corporate

   (587)

   (298)

 

$4,909 

$4,008 

Income tax expense (benefit):

 

 

Thermal Products

$1,407 

$1,005 

Mechanical Products

(2)

(179)

Electrical Products

240 

174 

Corporate

      (175)

      (69)

 

$   1,470 

$   931 

 

 

F - 18

 

 

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)


(14)  SEGMENT INFORMATION (Continued)

 

Years Ended
December 31,

 

2014

2013

Net earnings (loss):

 

 

Thermal Products

$3,292 

$3,322 

Mechanical Products

(3)

(593)

Electrical Products

562 

577 

Corporate

    (412)

    (229)

 

$3,439 

$3,077 

Capital expenditures:

 

 

Thermal Products

$595 

$349 

Mechanical Products

96 

16 

Electrical Products

   140 

    59 

 

$831 

$424 

 

 

 

 

December 31,

 

2014

2013

Identifiable assets:

 

 

Thermal Products

$26,211 

$23,934 

Mechanical Products

7,801 

7,093 

Electrical Products

   4,726 

   4,454 

 

$38,738 

$35,481 

The following table provides information about our geographic areas of operation. Net revenues from unaffiliated customers are based on the location to which the goods are shipped.

 

Years Ended
December 31,

 

2014

2013

Net revenues from unaffiliated customers:

 

 

U.S.

$14,363 

$13,337 

Foreign

 27,433 

 26,089 

 

$41.796 

$39,426 

 

 

 

December 31,

 

2014

2013

Property and equipment:

 

 

U.S.

$   621 

$   700 

Foreign

     647 

     554 

 

$1,268 

$1,254 

 

 

F - 19

 

 

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)


(15)  QUARTERLY CONSOLIDATED FINANCIAL DATA (Unaudited)

The following tables present certain unaudited consolidated quarterly financial information for each of the eight quarters ended December 31, 2014. In our opinion, this quarterly information has been prepared on the same basis as the consolidated financial statements and includes all adjustments (consisting only of normal recurring adjustments) necessary to present fairly the information for the periods presented. The results of operations for any quarter are not necessarily indicative of results for the full year or for any future period.

Year-over-year quarterly comparisons of our results of operations may not be as meaningful as the sequential quarterly comparisons set forth below that tend to reflect the cyclical activity of the semiconductor and ATE markets. Quarterly fluctuations in expenses are related directly to sales activity and volume and may also reflect the timing of operating expenses incurred throughout the year.

 

Quarters Ended

 

 

3/31/14

6/30/14

9/30/14

12/31/14

Total

Net revenues

$  8,797 

$12,343 

$10,794 

$  9,862 

$41,796 

Gross margin

4,185 

6,082 

5,168 

5,027 

20,462 

Earnings before income tax expense

411 

2,054 

1,268 

1,176 

4,909 

Income tax expense

125 

697 

431 

217 

1,470 

Net earnings

286 

1,357 

837 

959 

3,439 

 

 

 

 

 

 

Net earnings per common share - basic

$0.03 

$0.13 

$0.08 

$0.09 

$0.33 

Weighted average common shares outstanding - basic

10,393,956 

10,436,730 

10,440,803 

10,454,716 

10,431,743 

Net earnings per common share - diluted

$0.03 

$0.13 

$0.08 

$0.09 

$0.33 

Weighted average common shares outstanding - diluted

10,448,911 

10,456,183 

10,477,814 

10,480,867 

10,466,064 

 

Quarters Ended

 

 

3/31/13

6/30/13

9/30/13

12/31/13

Total

Net revenues

$  8,973 

$11,218 

$  9,900 

$  9,335 

$39,426 

Gross margin

4,105 

5,465 

4,756 

4,689 

19,015 

Earnings before income tax expense

370 

1,487 

1,114 

1,037 

4,008 

Income tax expense

78 

484 

24 

345 

931 

Net earnings

292 

1,003 

1,090 

692 

3,077 

 

 

 

 

 

 

Net earnings per common share - basic

$0.03 

$0.10 

$0.11 

$0.07 

$0.30 

Weighted average common shares outstanding - basic

10,327,428 

10,371,716 

10,377,189 

10,377,678 

10,363,678 

Net earnings per common share - diluted

$0.03 

$0.10 

$0.10 

$0.07 

$0.30 

Weighted average common shares outstanding - diluted

10,366,312 

10,394,094 

10,404,095 

10,435,096 

10,419,103 

 

 

 

F - 20

 

 

 

 

inTEST CORPORATION
SCHEDULE II -- VALUATION AND QUALIFYING ACCOUNTS
(in thousands)

 

 

 

Balance at
Beginning
of Period


Expense
(Recovery)



Deductions

Balance at
End of
Period

 

 

 

 

 

Year Ended December 31, 2014

 

 

 

 

Allowance for doubtful accounts

147    

-    

(1)   

146    

Warranty reserve

123    

96    

(101)   

118    

 

 

 

 

 

Year Ended December 31, 2013

 

 

 

 

Allowance for doubtful accounts

147    

-    

-    

147    

Warranty reserve

197    

37    

(111)   

123    

 

 

F -21