Book Online or Call 1-855-SAUSALITO

Sign In  |  Register  |  About Sausalito  |  Contact Us

Sausalito, CA
September 01, 2020 1:41pm
7-Day Forecast | Traffic
  • Search Hotels in Sausalito

  • ROOMS:

Conventional Anti-Rust and Anti-Oxidation Lubricants for Bearings

The following describes the ASTM/ISO viscosity grades of industrial bearing lubricants. Figure 13. Viscosity grades of industrial lubricants. ISO Viscosity System Conventional Antirust and Antioxidant Lubricants Conventional Antirust and Antioxidant (R&O) lubricants are the most common industrial lubricants. These lubricants can be applied to Timken® bearings used in various industrial applications without special conditions. Table 24.

Characteristic characteristics of the recommended conventional R&O lubricants Base raw materials Refined high viscosity index petroleum additives Anti-corrosion and antioxidant viscosity index Min. 80 pour point Max. -10°C Viscosity grade ISO/ASTM 32 to 220 Some low speed and/or Higher ambient temperature applications require higher viscosity grades. High speed and/or low temperature applications require lower viscosity grades.Extreme Pressure (EP) Industrial Gear Oil Extreme pressure gear oil can lubricate Timken® bearings in most heavy-duty industrial equipment. They can withstand the unusual impact loads common in heavy-duty equipment. Table 25.

Recommended industrial EP gear oil characteristics. Basic raw materials. Refined high viscosity index petroleum additives. Anti-corrosion and antioxidants. Extreme pressure (EP) additives (1)-load class 15.8 kg. Viscosity index min. 80 pour point max. -10 °C viscosity grade ISO/ASTM 100, 150, 220, 320, 4601) ASTM D 2782 Industrial Extreme Pressure (EP) gear oil is composed of highly refined petroleum plus corresponding inhibitor additives. They should not contain materials that can corrode or abrade the bearings.

Inhibitors should provide long-term anti-oxidation protection and protect bearings from corrosion in the presence of moisture. The lubricating oil should be able to avoid foaming during use and have good waterproof properties. Extreme pressure additives can also prevent scratches under boundary lubrication conditions. The recommended viscosity grade range is very wide. High temperature and/or low speed applications usually require higher viscosity grades. Low temperature and/or high speed applications require a lower viscosity grade.

Media Contact
Company Name: Hxh Bearing Co., Limited
Email: Send Email
Phone: 18168912858
Address:No.311 Guangnan Road, Liangxi District
City: Wuxi
State: Jiangsu
Country: China

Data & News supplied by
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.
Photos copyright by Jay Graham Photographer
Copyright © 2010-2020 & California Media Partners, LLC. All rights reserved.